uBoot and Starting kernel log for ubuntu 12.04

From the serial port choose 3 files on OTG loading tool in this order

Done uploading C:/Temp/12x12 Bringup R1/Dev3_Stage2MBoot_bcm5892_usbotg.bin_signed-20120123.bin

Done uploading C:/Temp/12x12 Bringup R1/u-boot0.img.pci3.0.tcms

Done uploading C:/Temp/12x12 Bringup R1/u-boot0.img

then on serial port you see as follows:

U-Boot 1.1.4 (Jun  4 2012 - 10:40:50)

U-Boot code: 43A00000 -> 43A2CB64  BSS: -> 43A73DFC

mem start 43900000 end 439fffff [Fixme]

glb data 43a6f628

NAND: 16bit WIDTH UMC_R_umc_addr_match_MEMADDR=383430,

UMC : Address match = 0x380d30

ERROR umc_nand_reset: Timeout on Reset Done!

Unrecognized NAND device!! (0x0)

Manufactuer ID = 0x0, Name = Unknown

 8bit WIDTH UMC_R_umc_addr_match_MEMADDR=380d30,

UMC : Address match = 0x380d30

ERROR umc_nand_reset: Timeout on Reset Done!

Unrecognized NAND device!! (0x0)

Manufactuer ID = 0x0, Name = Unknown

Can not find the NAND flash supported

board_nand_init fail

0 MiB

malloc sbrk_size 131096 pagesz 4096

sbrk old 43900000 new 43920018 increment 131096

sbrk alloc 43900000 131096

sbrk old 43920018 new 43921000 increment 4072

sbrk alloc 43920018 4072

Device ID = 0x0 not supported

*** Warning - bad CRC or NAND, using default environment

In:    serial

Out:   serial

Err:   serial

bcm5892#

U-Boot 1.1.4 (Jun  4 2012 - 10:40:50)

U-Boot code: 43A00000 -> 43A2CB64  BSS: -> 43A73DFC

mem start 43900000 end 439fffff [Fixme]

glb data 43a6f628

NAND: 16bit WIDTH UMC_R_umc_addr_match_MEMADDR=383430,

UMC : Address match = 0x380d30

ERROR umc_nand_reset: Timeout on Reset Done!

Unrecognized NAND device!! (0x0)

Manufactuer ID = 0x0, Name = Unknown

 8bit WIDTH UMC_R_umc_addr_match_MEMADDR=380d30,

UMC : Address match = 0x380d30

ERROR umc_nand_reset: Timeout on Reset Done!

Unrecognized NAND device!! (0x0)

Manufactuer ID = 0x0, Name = Unknown

Can not find the NAND flash supported

board_nand_init fail

0 MiB

malloc sbrk_size 131096 pagesz 4096

sbrk old 43900000 new 43920018 increment 131096

sbrk alloc 43900000 131096

sbrk old 43920018 new 43921000 increment 4072

sbrk alloc 43920018 4072

Device ID = 0x0 not supported

*** Warning - bad CRC or NAND, using default environment

In:    serial

Out:   serial

Err:   serial

bcm5892#

bcm5892#

bcm5892#

PASTE this STRING to SERIAL PORTS then type "run linux"

on TFTP server /tftpboot/uImage (this is default image that tftp look for, copy from buildroot/build/output/image/uImage to /tftpboot/ 
string is paste assign ip for serverip and clientip - the target and target connected through the Ethernet with crossing cable. (Tx ->Rx and Rx ->Tx) however some new PCs may have auto sync which does not require the crossing cable.

bcm5892# setenv ipaddr 10.100.100.55;setenv serverip 10.100.100.184;setenv ethaddr 00:0A:F7:00:01:66;setenv bootargs mem=128M console=ttyAMA0,115200n8 root=/dev/nfs rootdelay=3 nfsroot=10.100.100.184:/tftpboot/fs,tcp ip=10.100.100.55:10.100.100.184:10.100.100.1:255.255.255.0:equinox:eth0:off board=APOLLO12X debug earlyprink;setenv linux 'tftp 42000000 uImage; bootm'

bcm5892# run linux

malloc sbrk_size 4096 pagesz 4096

sbrk old 43921000 new 43922000 increment 4096

sbrk alloc 43921000 4096

malloc sbrk_size 4096 pagesz 4096

sbrk old 43922000 new 43923000 increment 4096

sbrk alloc 43922000 4096

malloc sbrk_size 4096 pagesz 4096

sbrk old 43923000 new 43924000 increment 4096

sbrk alloc 43923000 4096

malloc sbrk_size 4096 pagesz 4096

sbrk old 43924000 new 43925000 increment 4096

sbrk alloc 43924000 4096

malloc sbrk_size 4096 pagesz 4096

sbrk old 43925000 new 43926000 increment 4096

sbrk alloc 43925000 4096

malloc sbrk_size 4096 pagesz 4096

sbrk old 43926000 new 43927000 increment 4096

sbrk alloc 43926000 4096

malloc sbrk_size 4096 pagesz 4096

sbrk old 43927000 new 43928000 increment 4096

sbrk alloc 43927000 4096

malloc sbrk_size 4096 pagesz 4096

sbrk old 43928000 new 43929000 increment 4096

sbrk alloc 43928000 4096

malloc sbrk_size 4096 pagesz 4096

sbrk old 43929000 new 4392a000 increment 4096

sbrk alloc 43929000 4096

malloc sbrk_size 4096 pagesz 4096

sbrk old 4392a000 new 4392b000 increment 4096

sbrk alloc 4392a000 4096

malloc sbrk_size 4096 pagesz 4096

sbrk old 4392b000 new 4392c000 increment 4096

sbrk alloc 4392b000 4096

malloc sbrk_size 4096 pagesz 4096

sbrk old 4392c000 new 4392d000 increment 4096

sbrk alloc 4392c000 4096

malloc sbrk_size 4096 pagesz 4096

sbrk old 4392d000 new 4392e000 increment 4096

sbrk alloc 4392d000 4096

malloc sbrk_size 4096 pagesz 4096

sbrk old 4392e000 new 4392f000 increment 4096

sbrk alloc 4392e000 4096

malloc sbrk_size 4096 pagesz 4096

sbrk old 4392f000 new 43930000 increment 4096

sbrk alloc 4392f000 4096

malloc sbrk_size 4096 pagesz 4096

sbrk old 43930000 new 43931000 increment 4096

sbrk alloc 43930000 4096

malloc sbrk_size 4096 pagesz 4096

sbrk old 43931000 new 43932000 increment 4096

sbrk alloc 43931000 4096

malloc sbrk_size 4096 pagesz 4096

sbrk old 43932000 new 43933000 increment 4096

sbrk alloc 43932000 4096

Link  is up.

malloc sbrk_size 4096 pagesz 4096

sbrk old 43933000 new 43934000 increment 4096

sbrk alloc 43933000 4096

Read Auxiliary control/status reg =0x3f

TFTP from server 10.100.100.184; our IP address is 10.100.100.55

Filename 'uImage'.

Load address: 0x42000000

Loading: checksum bad

on Linux Server 

sudo /etc/init.d/networking restart then the magic begins from T to # (# good sign downloading)

T T T T T #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         ###############################################

done

Bytes transferred = 12217508 (ba6ca4 hex)

Boot reached stage 1

## Booting image at 42000000 ...

Boot reached stage 2

Boot reached stage 3

   Image Name:   Linux-3.0.17

   Image Type:   ARM Linux Kernel Image (uncompressed)

   Data Size:    12217444 Bytes = 11.7 MB

   Load Address: 40008000

   Entry Point:  40008000

Boot reached stage 4

Boot reached stage 5

Boot reached stage 6

OK

Boot reached stage 7

Boot reached stage 8

Boot reached stage 14

Boot reached stage 15

Starting kernel ...

[    0.000000] Linux version 3.0.17 (tovantran@Satellite) (gcc version 4.4.6 (crosstool-NG 1.15.2 - buildroot 2012.05) ) #2 Fri Aug 10 15:44:16 EDT 2012

[    0.000000] CPU: ARMv6-compatible processor [4117b365] revision 5 (ARMv6TEJ), cr=00c5387d

[    0.000000] CPU: VIPT aliasing data cache, unknown instruction cache

[    0.000000] Machine: Broadcom BCM5892 Chip

[    0.000000] Memory policy: ECC disabled, Data cache writeback

[    0.000000] On node 0 totalpages: 32768

[    0.000000] free_area_init_node: node 0, pgdat c0d2ea68, node_mem_map c0d5b000

[    0.000000]   Normal zone: 256 pages used for memmap

[    0.000000]   Normal zone: 0 pages reserved

[    0.000000]   Normal zone: 32512 pages, LIFO batch:7

[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768

[    0.000000] pcpu-alloc: [0] 0

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512

[    0.000000] Kernel command line: mem=128M console=ttyAMA0,115200n8 root=/dev/nfs rootdelay=3 nfsroot=10.100.100.184:/tftpboot/fs,tcp ip=10.100.100.55:10.100.100.184:10100.100.1:255.255.255.0:equinox:eth0:off board=APOLLO12X debug earlyprink

[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)

[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)

[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)

[    0.000000] Memory: 128MB = 128MB total

[    0.000000] Memory: 116220k/116220k available, 14852k reserved, 0K highmem

[    0.000000] Virtual kernel memory layout:

[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

[    0.000000]     DMA     : 0xfee00000 - 0xffe00000   (  16 MB)

[    0.000000]     vmalloc : 0xc8800000 - 0xd0000000   ( 120 MB)

[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)

[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)

[    0.000000]       .init : 0xc0008000 - 0xc0a47000   (10492 kB)

[    0.000000]       .text : 0xc0a47000 - 0xc0d0f7d8   (2850 kB)

[    0.000000]       .data : 0xc0d10000 - 0xc0d2f0e0   ( 125 kB)

[    0.000000]        .bss : 0xc0d2f104 - 0xc0d5a228   ( 173 kB)

[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

[    0.000000] NR_IRQS:129

[    0.000000] sched_clock: 32 bits at 6MHz, resolution 166ns, wraps every 715827ms

[    0.000000] Console: colour dummy device 80x30

[    0.000380] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)

[    0.080092] pid_max: default: 32768 minimum: 301

[    0.080355] Security Framework initialized

[    0.080401] Digsig Initializing module

[    0.080585] Mount-cache hash table entries: 512

[    0.081449] CPU: Testing write buffer coherency: ok

[    0.082897] devtmpfs: initialized

[    0.088019] NET: Registered protocol family 16

[    0.104619] Detected board Apollo 12x12

[    0.108154] Serial: AMBA PL011 UART driver

[    0.108490] uart0: ttyAMA0 at MMIO 0xd0000 (irq = 70) is a PL011 rev0

[    0.372551] console [ttyAMA0] enabled

[    0.377580] uart1: ttyAMA1 at MMIO 0xd1000 (irq = 71) is a PL011 rev0

[    0.385251] uart2: ttyAMA2 at MMIO 0xd2000 (irq = 72) is a PL011 rev0

[    0.392869] uart3: ttyAMA3 at MMIO 0xd3000 (irq = 73) is a PL011 rev0

[    0.423148] bio: create slab <bio-0> at 0

[    0.428929] pl08xdmac dma0: initialized 8 virtual memcpy channels

[    0.435180] pl08xdmac dma0: initialized 22 virtual slave channels

[    0.458876] pl08xdmac dma0: DMA: PL080 rev0 at 0x00083000 irq 63

[    0.465253] pl08xdmac dma1: initialized 2 virtual memcpy channels

[    0.471455] pl08xdmac dma1: initialized 2 virtual slave channels

[    0.480514] pl08xdmac dma1: DMA: PL081 rev0 at 0x00084000 irq 7

[    0.491983] Switching to clocksource sp804.3

[    0.510194] NET: Registered protocol family 2

[    0.514823] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)

[    0.522405] TCP established hash table entries: 4096 (order: 3, 32768 bytes)

[    0.529844] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)

[    0.536506] TCP: Hash tables configured (established 4096 bind 4096)

[    0.542876] TCP reno registered

[    0.546039] UDP hash table entries: 256 (order: 0, 4096 bytes)

[    0.551960] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

[    0.558871] NET: Registered protocol family 1

[    0.564099] RPC: Registered named UNIX socket transport module.

[    0.570143] RPC: Registered udp transport module.

[    0.574864] RPC: Registered tcp transport module.

[    0.579613] RPC: Registered tcp NFSv4.1 backchannel transport module.

[    4.241238] sp804 sp804.1: added hardware timer source

[    4.246718] sp804 sp804.4: added hardware timer source

[    4.252094] sp804 sp804.5: added hardware timer source

[    4.257574] sp804 sp804.6: added hardware timer source

[    4.262956] sp804 sp804.7: added hardware timer source

[    4.268428] sp804 sp804.8: added hardware timer source

[    4.273812] sp804 sp804.9: added hardware timer source

[    4.287565] bcm589x-pwm bcm589x-pwm: added PWM channel 0

[    4.292914] bcm589x-pwm bcm589x-pwm: added PWM channel 1

[    4.298350] bcm589x-pwm bcm589x-pwm: added PWM channel 2

[    4.303680] bcm589x-pwm bcm589x-pwm: added PWM channel 3

[    4.326962] bcm589x-adc bcm589x-adc: added static ADC channel 0

[    4.332920] bcm589x-adc bcm589x-adc: added static ADC channel 1

[    4.338957] bcm589x-adc bcm589x-adc: added static ADC channel 2

[    4.344896] bcm589x-adc bcm589x-adc: added static ADC channel 3

[    4.350851] bcm589x-adc bcm589x-adc: added static ADC channel 4

[    4.356805] bcm589x-adc bcm589x-adc: added static ADC channel 5

[    4.362743] bcm589x-adc bcm589x-adc: added static ADC channel 6

[    4.368697] bcm589x-adc bcm589x-adc: added static ADC channel 7

[    4.374644] Running tests on ADC port 0

[    4.378524] Read value 0x000003ff on port 0

[    4.382727] Read value 0x000003ff on port 0

[    4.386947] Read value 0x000003ff on port 0

[    4.391150] Read value 0x000003ff on port 0

[    4.395353] Read value 0x000003ff on port 0

[    4.399573] Read value 0x000003ff on port 0

[    4.403777] Read value 0x000003ff on port 0

[    4.407997] Read value 0x000003ff on port 0

[    4.412201] Read value 0x000003ff on port 0

[    4.416420] Read value 0x000003ff on port 0

[    4.420623] Read value 0x000003ff on port 0

[    4.424827] Read value 0x000003ff on port 0

[    4.429046] Read value 0x000003ff on port 0

[    4.433250] Read value 0x000003ff on port 0

[    4.437470] Read value 0x000003ff on port 0

[    4.441674] Read value 0x000003ff on port 0

[    4.445877] Read value 0x000003ff on port 0

[    4.450095] Read value 0x000003ff on port 0

[    4.454299] Read value 0x000003ff on port 0

[    4.458518] Read value 0x000003ff on port 0

[    4.462722] Read value 0x000003ff on port 0

[    4.466940] Read value 0x000003ff on port 0

[    4.471143] Read value 0x000003ff on port 0

[    4.475346] Read value 0x000003ff on port 0

[    4.479565] Read value 0x000003ff on port 0

[    4.483769] Read value 0x000003ff on port 0

[    4.487987] Read value 0x000003ff on port 0

[    4.492191] Read value 0x000003ff on port 0

[    4.496410] Read value 0x000003ff on port 0

[    4.500613] Read value 0x000003ff on port 0

[    4.504817] Read value 0x000003ff on port 0

[    4.509035] Read value 0x000003ff on port 0

[    4.513238] Read value 0x000003ff on port 0

[    4.517458] Read value 0x000003ff on port 0

[    4.521662] Read value 0x000003ff on port 0

[    4.525865] Read value 0x000003ff on port 0

[    4.530084] Read value 0x000003ff on port 0

[    4.534287] Read value 0x000003ff on port 0

[    4.538506] Read value 0x000003ff on port 0

[    4.542710] Read value 0x000003ff on port 0

[    4.546929] Read value 0x000003ff on port 0

[    4.551133] Read value 0x000003ff on port 0

[    4.555336] Read value 0x000003ff on port 0

[    4.559556] Read value 0x000003ff on port 0

[    4.563759] Read value 0x000003ff on port 0

[    4.567978] Read value 0x000003ff on port 0

[    4.572182] Read value 0x000003ff on port 0

[    4.576401] Read value 0x000003ff on port 0

[    4.580604] Read value 0x000003ff on port 0

[    4.584807] Read value 0x000003ff on port 0

[    4.589015] Running tests on ADC port 1

[    4.592875] Read value 0x0000036d on port 1

[    4.597095] Read value 0x00000356 on port 1

[    4.601299] Read value 0x0000033d on port 1

[    4.605502] Read value 0x00000324 on port 1

[    4.609722] Read value 0x000002e3 on port 1

[    4.613926] Read value 0x000002d3 on port 1

[    4.618145] Read value 0x000002ba on port 1

[    4.622348] Read value 0x000002a2 on port 1

[    4.626567] Read value 0x00000263 on port 1

[    4.630771] Read value 0x00000258 on port 1

[    4.634974] Read value 0x00000244 on port 1

[    4.639194] Read value 0x0000022d on port 1

[    4.643398] Read value 0x000001eb on port 1

[    4.647617] Read value 0x000001ea on port 1

[    4.651821] Read value 0x000001db on port 1

[    4.656025] Read value 0x000001c3 on port 1

[    4.660244] Read value 0x00000188 on port 1

[    4.664448] Read value 0x0000018d on port 1

[    4.668667] Read value 0x00000183 on port 1

[    4.672871] Read value 0x0000016c on port 1

[    4.677090] Read value 0x00000135 on port 1

[    4.681294] Read value 0x0000013e on port 1

[    4.685498] Read value 0x0000013b on port 1

[    4.689717] Read value 0x00000120 on port 1

[    4.693921] Read value 0x000000f6 on port 1

[    4.698140] Read value 0x00000101 on port 1

[    4.702344] Read value 0x00000104 on port 1

[    4.706563] Read value 0x000000ec on port 1

[    4.710766] Read value 0x000000c5 on port 1

[    4.714970] Read value 0x000000d4 on port 1

[    4.719189] Read value 0x000000e2 on port 1

[    4.723393] Read value 0x000000c5 on port 1

[    4.727612] Read value 0x000000a7 on port 1

[    4.731816] Read value 0x000000b4 on port 1

[    4.736019] Read value 0x000000c3 on port 1

[    4.740238] Read value 0x000000a8 on port 1

[    4.744442] Read value 0x0000008f on port 1

[    4.748661] Read value 0x0000009c on port 1

[    4.752864] Read value 0x000000b1 on port 1

[    4.757084] Read value 0x00000091 on port 1

[    4.761288] Read value 0x0000007d on port 1

[    4.765492] Read value 0x0000008a on port 1

[    4.769710] Read value 0x000000a3 on port 1

[    4.773914] Read value 0x00000082 on port 1

[    4.778133] Read value 0x00000075 on port 1

[    4.782337] Read value 0x00000080 on port 1

[    4.786555] Read value 0x0000009c on port 1

[    4.790758] Read value 0x0000007c on port 1

[    4.794962] Read value 0x0000006f on port 1

[    4.799182] Read value 0x0000007b on port 1

[    4.803373] Running tests on ADC port 2

[    4.807247] Read value 0x0000016d on port 2

[    4.811450] Read value 0x0000017c on port 2

[    4.815654] Read value 0x00000191 on port 2

[    4.819873] Read value 0x0000017d on port 2

[    4.824078] Read value 0x0000017f on port 2

[    4.828297] Read value 0x00000160 on port 2

[    4.832501] Read value 0x0000015f on port 2

[    4.836720] Read value 0x00000225 on port 2

[    4.840924] Read value 0x0000023c on port 2

[    4.845128] Read value 0x00000247 on port 2

[    4.849347] Read value 0x00000208 on port 2

[    4.853551] Read value 0x0000021b on port 2

[    4.857770] Read value 0x000001ea on port 2

[    4.861974] Read value 0x000001fe on port 2

[    4.866177] Read value 0x00000210 on port 2

[    4.870396] Read value 0x000001e9 on port 2

[    4.874600] Read value 0x000001ec on port 2

[    4.878820] Read value 0x000001c5 on port 2

[    4.883023] Read value 0x000001c4 on port 2

[    4.887242] Read value 0x000001aa on port 2

[    4.891446] Read value 0x000001bb on port 2

[    4.895649] Read value 0x000001bd on port 2

[    4.899869] Read value 0x000001a6 on port 2

[    4.904072] Read value 0x000001a2 on port 2

[    4.908291] Read value 0x0000018f on port 2

[    4.912495] Read value 0x00000198 on port 2

[    4.916715] Read value 0x00000181 on port 2

[    4.920918] Read value 0x00000183 on port 2

[    4.925122] Read value 0x00000191 on port 2

[    4.929341] Read value 0x00000177 on port 2

[    4.933544] Read value 0x0000017a on port 2

[    4.937763] Read value 0x00000161 on port 2

[    4.941967] Read value 0x00000166 on port 2

[    4.946170] Read value 0x0000016a on port 2

[    4.950389] Read value 0x0000023d on port 2

[    4.954592] Read value 0x00000251 on port 2

[    4.958811] Read value 0x0000022b on port 2

[    4.963015] Read value 0x00000235 on port 2

[    4.967235] Read value 0x000001fb on port 2

[    4.971438] Read value 0x00000206 on port 2

[    4.975642] Read value 0x00000211 on port 2

[    4.979862] Read value 0x000001f9 on port 2

[    4.984066] Read value 0x000001f5 on port 2

[    4.988285] Read value 0x000001db on port 2

[    4.992490] Read value 0x000001e5 on port 2

[    4.996709] Read value 0x000001c5 on port 2

[    5.000912] Read value 0x000001d2 on port 2

[    5.005116] Read value 0x000001dd on port 2

[    5.009335] Read value 0x000001d1 on port 2

[    5.013538] Read value 0x000001cd on port 2

[    5.017745] Running tests on ADC port 3

[    5.021604] Read value 0x000003ff on port 3

[    5.025807] Read value 0x000003ff on port 3

[    5.030027] Read value 0x000003ff on port 3

[    5.034230] Read value 0x000003ff on port 3

[    5.038449] Read value 0x000003ff on port 3

[    5.042652] Read value 0x000003ff on port 3

[    5.046870] Read value 0x000003ff on port 3

[    5.051074] Read value 0x000003ff on port 3

[    5.055278] Read value 0x000003ff on port 3

[    5.059496] Read value 0x000003ff on port 3

[    5.063700] Read value 0x000003ff on port 3

[    5.067919] Read value 0x000003ff on port 3

[    5.072123] Read value 0x000003ff on port 3

[    5.076342] Read value 0x000003ff on port 3

[    5.080546] Read value 0x000003ff on port 3

[    5.084749] Read value 0x000003ff on port 3

[    5.088968] Read value 0x000003ff on port 3

[    5.093171] Read value 0x000003ff on port 3

[    5.097390] Read value 0x000003ff on port 3

[    5.101594] Read value 0x000003ff on port 3

[    5.105798] Read value 0x000003ff on port 3

[    5.110018] Read value 0x000003ff on port 3

[    5.114222] Read value 0x000003ff on port 3

[    5.118441] Read value 0x000003ff on port 3

[    5.122644] Read value 0x000003ff on port 3

[    5.126863] Read value 0x000003fb on port 3

[    5.131068] Read value 0x000003e6 on port 3

[    5.135272] Read value 0x000003c9 on port 3

[    5.139492] Read value 0x000003b2 on port 3

[    5.143695] Read value 0x000003a4 on port 3

[    5.147915] Read value 0x0000038d on port 3

[    5.152118] Read value 0x00000371 on port 3

[    5.156337] Read value 0x00000359 on port 3

[    5.160540] Read value 0x0000034d on port 3

[    5.164744] Read value 0x00000336 on port 3

[    5.168964] Read value 0x00000319 on port 3

[    5.173168] Read value 0x00000304 on port 3

[    5.177387] Read value 0x000002f8 on port 3

[    5.181590] Read value 0x000002e1 on port 3

[    5.185794] Read value 0x000002c7 on port 3

[    5.190014] Read value 0x000002b1 on port 3

[    5.194218] Read value 0x000002a6 on port 3

[    5.198437] Read value 0x0000028e on port 3

[    5.202641] Read value 0x00000278 on port 3

[    5.206860] Read value 0x00000262 on port 3

[    5.211064] Read value 0x0000025b on port 3

[    5.215268] Read value 0x00000242 on port 3

[    5.219488] Read value 0x00000236 on port 3

[    5.223692] Read value 0x00000224 on port 3

[    5.227912] Read value 0x0000021b on port 3

[    5.232103] Running tests on ADC port 4

[    5.235961] Read value 0x0000003d on port 4

[    5.240181] Read value 0x00000039 on port 4

[    5.244385] Read value 0x00000042 on port 4

[    5.248605] Read value 0x0000003d on port 4

[    5.252808] Read value 0x00000039 on port 4

[    5.257037] Read value 0x00000036 on port 4

[    5.261241] Read value 0x00000040 on port 4

[    5.265444] Read value 0x0000003a on port 4

[    5.269664] Read value 0x00000037 on port 4

[    5.273867] Read value 0x00000034 on port 4

[    5.278087] Read value 0x0000003f on port 4

[    5.282291] Read value 0x00000036 on port 4

[    5.286511] Read value 0x00000036 on port 4

[    5.290714] Read value 0x00000033 on port 4

[    5.294918] Read value 0x0000003d on port 4

[    5.299136] Read value 0x00000033 on port 4

[    5.303340] Read value 0x00000034 on port 4

[    5.307559] Read value 0x00000031 on port 4

[    5.311762] Read value 0x0000003e on port 4

[    5.315966] Read value 0x00000032 on port 4

[    5.320186] Read value 0x00000033 on port 4

[    5.324390] Read value 0x00000030 on port 4

[    5.328609] Read value 0x0000003c on port 4

[    5.332812] Read value 0x00000031 on port 4

[    5.337032] Read value 0x00000032 on port 4

[    5.341236] Read value 0x00000030 on port 4

[    5.345439] Read value 0x0000003d on port 4

[    5.349658] Read value 0x0000002f on port 4

[    5.353862] Read value 0x00000032 on port 4

[    5.358081] Read value 0x00000030 on port 4

[    5.362285] Read value 0x0000003c on port 4

[    5.366505] Read value 0x0000002f on port 4

[    5.370709] Read value 0x00000032 on port 4

[    5.374913] Read value 0x00000030 on port 4

[    5.379132] Read value 0x0000003b on port 4

[    5.383336] Read value 0x0000002f on port 4

[    5.387555] Read value 0x00000031 on port 4

[    5.391758] Read value 0x00000031 on port 4

[    5.395962] Read value 0x0000003a on port 4

[    5.400182] Read value 0x0000002f on port 4

[    5.404385] Read value 0x00000031 on port 4

[    5.408604] Read value 0x00000033 on port 4

[    5.412807] Read value 0x0000003b on port 4

[    5.417027] Read value 0x0000002f on port 4

[    5.421231] Read value 0x00000032 on port 4

[    5.425434] Read value 0x00000034 on port 4

[    5.429653] Read value 0x0000003c on port 4

[    5.433857] Read value 0x0000002f on port 4

[    5.438077] Read value 0x00000031 on port 4

[    5.442280] Read value 0x00000034 on port 4

[    5.446487] Running tests on ADC port 5

[    5.450347] Read value 0x0000026e on port 5

[    5.454550] Read value 0x000001f2 on port 5

[    5.458769] Read value 0x00000183 on port 5

[    5.462973] Read value 0x0000012a on port 5

[    5.467192] Read value 0x000000e8 on port 5

[    5.471396] Read value 0x000000b8 on port 5

[    5.475600] Read value 0x00000092 on port 5

[    5.479818] Read value 0x0000007f on port 5

[    5.484022] Read value 0x0000006b on port 5

[    5.488242] Read value 0x0000005e on port 5

[    5.492446] Read value 0x0000005e on port 5

[    5.496665] Read value 0x00000061 on port 5

[    5.500870] Read value 0x00000056 on port 5

[    5.505073] Read value 0x00000059 on port 5

[    5.509292] Read value 0x00000056 on port 5

[    5.513496] Read value 0x00000057 on port 5

[    5.517715] Read value 0x0000005b on port 5

[    5.521919] Read value 0x0000005c on port 5

[    5.526122] Read value 0x0000005d on port 5

[    5.530342] Read value 0x0000005d on port 5

[    5.534546] Read value 0x0000005d on port 5

[    5.538765] Read value 0x0000005c on port 5

[    5.542968] Read value 0x0000005d on port 5

[    5.547187] Read value 0x0000005c on port 5

[    5.551390] Read value 0x0000005d on port 5

[    5.555594] Read value 0x0000005d on port 5

[    5.559812] Read value 0x0000005c on port 5

[    5.564016] Read value 0x0000005d on port 5

[    5.568235] Read value 0x0000005d on port 5

[    5.572438] Read value 0x0000005d on port 5

[    5.576657] Read value 0x0000005c on port 5

[    5.580861] Read value 0x0000005d on port 5

[    5.585064] Read value 0x0000005c on port 5

[    5.589283] Read value 0x0000005d on port 5

[    5.593487] Read value 0x0000005c on port 5

[    5.597706] Read value 0x0000005d on port 5

[    5.601910] Read value 0x0000005c on port 5

[    5.606114] Read value 0x0000005d on port 5

[    5.610333] Read value 0x0000005c on port 5

[    5.614536] Read value 0x0000005d on port 5

[    5.618756] Read value 0x0000005c on port 5

[    5.622960] Read value 0x0000005d on port 5

[    5.627179] Read value 0x0000005c on port 5

[    5.631382] Read value 0x0000005d on port 5

[    5.635586] Read value 0x0000005c on port 5

[    5.639804] Read value 0x0000005c on port 5

[    5.644008] Read value 0x0000005d on port 5

[    5.648227] Read value 0x0000005c on port 5

[    5.652431] Read value 0x0000005c on port 5

[    5.656650] Read value 0x0000005e on port 5

[    5.660841] Running tests on ADC port 6

[    5.664700] Read value 0x000002cd on port 6

[    5.668919] Read value 0x00000239 on port 6

[    5.673123] Read value 0x000001af on port 6

[    5.677343] Read value 0x00000140 on port 6

[    5.681547] Read value 0x000000f5 on port 6

[    5.685750] Read value 0x000000b5 on port 6

[    5.689970] Read value 0x00000088 on port 6

[    5.694174] Read value 0x00000073 on port 6

[    5.698393] Read value 0x0000005e on port 6

[    5.702597] Read value 0x0000005b on port 6

[    5.706816] Read value 0x00000057 on port 6

[    5.711020] Read value 0x00000056 on port 6

[    5.715223] Read value 0x00000055 on port 6

[    5.719443] Read value 0x00000055 on port 6

[    5.723646] Read value 0x00000054 on port 6

[    5.727865] Read value 0x00000054 on port 6

[    5.732069] Read value 0x00000054 on port 6

[    5.736272] Read value 0x00000054 on port 6

[    5.740491] Read value 0x00000054 on port 6

[    5.744695] Read value 0x00000054 on port 6

[    5.748914] Read value 0x00000054 on port 6

[    5.753118] Read value 0x00000055 on port 6

[    5.757338] Read value 0x00000053 on port 6

[    5.761542] Read value 0x00000053 on port 6

[    5.765745] Read value 0x00000053 on port 6

[    5.769964] Read value 0x00000054 on port 6

[    5.774167] Read value 0x00000053 on port 6

[    5.778387] Read value 0x00000054 on port 6

[    5.782590] Read value 0x00000054 on port 6

[    5.786808] Read value 0x00000055 on port 6

[    5.791012] Read value 0x00000054 on port 6

[    5.795216] Read value 0x00000054 on port 6

[    5.799435] Read value 0x00000054 on port 6

[    5.803639] Read value 0x00000055 on port 6

[    5.807859] Read value 0x00000053 on port 6

[    5.812062] Read value 0x00000054 on port 6

[    5.816266] Read value 0x00000054 on port 6

[    5.820485] Read value 0x00000054 on port 6

[    5.824689] Read value 0x00000054 on port 6

[    5.828908] Read value 0x00000055 on port 6

[    5.833112] Read value 0x00000054 on port 6

[    5.837333] Read value 0x00000054 on port 6

[    5.841537] Read value 0x00000053 on port 6

[    5.845740] Read value 0x00000054 on port 6

[    5.849959] Read value 0x00000054 on port 6

[    5.854163] Read value 0x00000054 on port 6

[    5.858385] Read value 0x00000053 on port 6

[    5.862589] Read value 0x00000053 on port 6

[    5.866809] Read value 0x00000053 on port 6

[    5.871012] Read value 0x00000053 on port 6

[    5.875204] Running tests on ADC port 7

[    5.879078] Read value 0x0000027e on port 7

[    5.883282] Read value 0x00000225 on port 7

[    5.887502] Read value 0x000001cc on port 7

[    5.891706] Read value 0x00000184 on port 7

[    5.895909] Read value 0x0000014a on port 7

[    5.900128] Read value 0x0000011a on port 7

[    5.904332] Read value 0x000000f3 on port 7

[    5.908551] Read value 0x000000cc on port 7

[    5.912755] Read value 0x000000b8 on port 7

[    5.916974] Read value 0x000000a3 on port 7

[    5.921178] Read value 0x00000091 on port 7

[    5.925382] Read value 0x00000086 on port 7

[    5.929601] Read value 0x00000084 on port 7

[    5.933804] Read value 0x00000083 on port 7

[    5.938024] Read value 0x00000080 on port 7

[    5.942229] Read value 0x00000080 on port 7

[    5.946448] Read value 0x00000080 on port 7

[    5.950652] Read value 0x0000007f on port 7

[    5.954856] Read value 0x00000077 on port 7

[    5.959075] Read value 0x00000072 on port 7

[    5.963280] Read value 0x00000070 on port 7

[    5.967499] Read value 0x0000006e on port 7

[    5.971703] Read value 0x00000073 on port 7

[    5.975906] Read value 0x0000006e on port 7

[    5.980126] Read value 0x00000073 on port 7

[    5.984330] Read value 0x0000006f on port 7

[    5.988549] Read value 0x0000006d on port 7

[    5.992752] Read value 0x0000006a on port 7

[    5.996971] Read value 0x00000071 on port 7

[    6.001175] Read value 0x0000006d on port 7

[    6.005378] Read value 0x0000006c on port 7

[    6.009598] Read value 0x00000070 on port 7

[    6.013802] Read value 0x0000006f on port 7

[    6.018021] Read value 0x0000006c on port 7

[    6.022224] Read value 0x0000006d on port 7

[    6.026444] Read value 0x00000069 on port 7

[    6.030647] Read value 0x00000069 on port 7

[    6.034850] Read value 0x00000067 on port 7

[    6.039070] Read value 0x0000006a on port 7

[    6.043274] Read value 0x0000006f on port 7

[    6.047493] Read value 0x0000006d on port 7

[    6.051697] Read value 0x0000006b on port 7

[    6.055900] Read value 0x0000006a on port 7

[    6.060119] Read value 0x00000070 on port 7

[    6.064322] Read value 0x0000006e on port 7

[    6.068541] Read value 0x00000072 on port 7

[    6.072744] Read value 0x0000006f on port 7

[    6.076963] Read value 0x0000006c on port 7

[    6.081167] Read value 0x0000006d on port 7

[    6.085370] Read value 0x0000006a on port 7

[    6.091128] bcm589x-bbl bcm589x-bbl: BBL hardware initialized

[    6.640248] NET: Registered protocol family 38

[    6.655390] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

[    6.662929] io scheduler noop registered

[    6.666898] io scheduler deadline registered

[    6.671427] io scheduler cfq registered (default)

[    6.676258] bcm589x-gpio bcm589x-gpio: Initialized chip 589x with GPIO lines 0:114

[    6.737443] uart-pl011 uart0: DMA channel TX dma1chan0

[    6.742630] uart-pl011 uart0: DMA channel RX dma1chan1

[    6.747901] uart-pl011 uart1: DMA channel TX dma1chan2

[    6.753065] uart-pl011 uart1: DMA channel RX dma1chan3

[    6.758263] uart-pl011 uart2: DMA channel TX dma1chan4

[    6.763424] uart-pl011 uart2: DMA channel RX dma1chan5

[    6.768611] uart-pl011 uart3: DMA channel TX dma1chan6

[    6.773771] uart-pl011 uart3: DMA channel RX dma1chan7

[    6.827668] bcm589x_mac: MAC addr: 00:0a:f7:00:01:66

[    6.879778] bcm589x_mac_mdio: probed

[    6.897376] bcm589x-rtc bcm589x-rtc: rtc core: registered bcm589x-rtc as rtc0

[    6.927907] Registered led device: bcm589x:msr

[    6.937358] Registered led device: bcm589x:keypad

[    6.959998] ss_proxy_init: Security Service device Version: AA0100AA !

[    7.079320] ss_kernel_verify_sbi: Final SBI check success!

[    7.086031] Certificate used earlier than allowed (6(now)<1327085672)

[    7.105105] ss_kernel_cert_init: Lib success !

[    7.109618] ss_kernel_cfg_create: sys/kernel/syscfg ...

[    7.114878] ss_kernel_spak_get_security_standard: Can not find security standard!!

[    7.122504] ss_kernel_cfg_set_security_standard: PCI : len: 3 Ver: 3.1 : len: 3

[    7.607512] ss_kernel_rng_init

[    7.638065] ss_kernel_tamper_init

[    7.656188] ss_kernel_kek_init

[    7.667525] ss_kernel_mem_init

[    7.686555] ss_kernel_spak_drv_init

[    7.696537] ss_kernel_pin_init

[    7.715474] input: ss_pin as /devices/virtual/input/input0

[    7.726690] TCP cubic registered

[    7.755068] bcm589x-rtc bcm589x-rtc: setting system clock to 1970-01-01 00:00:00 UTC (0)

[    7.787391] IP-Config: Gateway not on directly connected network.

[    7.793633] Warning: unable to open an initial console.

[    7.804504] Freeing init memory: 10492K

ÿStarting service syslog                                                 [FAILED]

syslogd: invalid option -- D

BusyBox v1.20.1 (2012-08-10 15:05:55 EDT) multi-call binary.

Usage: syslogd [OPTIONS]

System logging utility

(this version of syslogd ignores /etc/syslog.conf)

        -n              Run in foreground

        -O FILE         Log to FILE (default:/var/log/messages)

        -l N            Log only messages more urgent than prio N (1-8)

        -S              Smaller output

        -s SIZE         Max size (KB) before rotation (default:200KB, 0=off)

        -b N            N rotated logs to keep (default:1, max=99, 0=purge)

        -R HOST[:PORT]  Log to IP or hostname on PORT (default PORT=514/UDP)

        -L              Log locally and via network (default is network only[    7.982329] digsig_add_module_runtime: Add : amba_pl022 start:BF000000 len: 10968 time: 4294938068 hash: B1 6D 7A E1

 if -R)

Starting service klog                                                       [OK]

Setting default locale en_US.utf8                                           [OK]

Loading kernel module amba-pl022                                        [    8.036849] ssp-pl022 ssp0: ARM PL022 driver, device ID: 0x00041022

[    8.043262] pl022: mapped registers from 0x000ca000 to c8840000

[    8.049400] ssp-pl022 ssp0: setup for DMA on RX dma1chan9, TX dma1chan8

[    8.068144] ssp-pl022 ssp1: ARM PL022 driver, device ID: 0x00041022

[    8.074553] pl022: mapped registers from 0x000cb000 to c8842000

[    8.080693] ssp-pl022 ssp1: setup for DMA on RX dma1chan11, TX dma1chan10

[    8.108125] ssp-pl022 ssp3: ARM PL022 driver, device ID: 0x00041022

[    8.114535] pl022: mapped registers from 0x000e4000 to c8844000

[    8.120680] ssp-pl022 ssp3: setup for DMA on RX dma1chan13, TX dma1chan12

[    8.157575] ssp-pl022 ssp4: ARM PL022 driver, device ID: 0x00041022

[    8.164014] pl022: mapped registers from 0x000e2000 to c8846000

[    8.170162] ssp-pl022 ssp4: setup for DMA on RX dma1chan19, TX dma1chan18

    [OK]

Loading kernel module mtd                                               [FAILED]

modprobe: module mtd not found in modules.dep

Loading kernel module m25p80                                            [    8.315702] digsig_add_module_runtime: Add : m25p80 start:BF006000 len: 7724 time: 4294938101 hash: D8 D7 41 A2

[    8.357285] m25p80 spi4.0: found m25p05-nonjedec, expected m45pe20

[    8.363523] m25p80 spi4.0: m25p05-nonjedec (64 Kbytes)

    [OK]

Loading kernel module i2c-core                                          [    8.434428] digsig_add_module_runtime: Add : i2c_core start:BF00C000 len: 11948 time: 4294938113 hash: 98 C3 33 70

    [OK]

Loading kernel module i2c-bcm589x                                       [    8.520779] digsig_add_module_runtime: Add : i2c_bcm589x start:BF014000 len: 3668 time: 4294938122 hash: 1D 55 08 BD

[    8.543066] bcm589x-i2c bcm589x-i2c.0: Added i2c bus speed 400KHz, 0usec delay.

[    8.577462] bcm589x-i2c bcm589x-i2c.1: Added i2c bus speed 400KHz, 0usec delay.

    [OK]

Loading kernel module tda8026                                           [    8.620076] digsig_add_module_runtime: Add : tda8026 start:BF019000 len: 888 time: 4294938132 hash: F4 1C 1F 8F

[    8.647701] tda8026 1-0024: Error -121 selecting chip 0

[    8.674381] tda8026: probe of 1-0024 failed with error -121

[    8.697681] tda8026 1-0026: Error -121 selecting chip 0

[    8.722377] tda8026: probe of 1-0026 failed with error -121

    [OK]

Loading kernel module usbcore                                           [    8.793294] digsig_add_module_runtime: Add : usbcore start:BF01D000 len: 88956 time: 4294938148 hash: 11 B5 FE 56

[    8.824429] usbcore: registered new interface driver usbfs

[    8.845608] usbcore: registered new interface driver hub

[    8.863151] usbcore: registered new device driver usb

    [OK]

Loading kernel module ohci-hcd                                          [    8.898464] digsig_add_module_runtime: Add : ohci_hcd start:BF03D000 len: 15260 time: 4294938159 hash: D8 A1 A7 BB

[    8.911286] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    8.917897] bcm589x-ohci bcm589x-ohci.1: BCM589x USB-OHCI

[    8.923411] bcm589x-ohci bcm589x-ohci.1: new USB bus registered, assigned bus number 1

[    8.931594] bcm589x-ohci bcm589x-ohci.1: irq 59, io mem 0x000b1000

[    9.000544] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001

[    9.007446] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    9.014692] usb usb1: Product: BCM589x USB-OHCI

[    9.019267] usb usb1: Manufacturer: Linux 3.0.17 BCM589x USB-OHCI

[    9.025381] usb usb1: SerialNumber: bcm589x

[    9.043711] hub 1-0:1.0: USB hub found

[    9.047677] hub 1-0:1.0: 1 port detected

[    9.057826] bcm589x-ohci bcm589x-ohci.2: BCM589x USB-OHCI

[    9.063339] bcm589x-ohci bcm589x-ohci.2: new USB bus registered, assigned bus number 2

[    9.071546] bcm589x-ohci bcm589x-ohci.2: irq 60, io mem 0x000b2000

[    9.140539] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001

[    9.147455] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    9.154703] usb usb2: Product: BCM589x USB-OHCI

[    9.159284] usb usb2: Manufacturer: Linux 3.0.17 BCM589x USB-OHCI

[    9.165398] usb usb2: SerialNumber: bcm589x

[    9.183727] hub 2-0:1.0: USB hub found

[    9.187683] hub 2-0:1.0: 1 port detected

    [OK]

Loading kernel module hid                                               [    9.247971] digsig_add_module_runtime: Add : hid start:BF044000 len: 42848 time: 4294938194 hash: 86 BF 5A 6A

    [OK]

Loading kernel module usbhid                                            [    9.302133] digsig_add_module_runtime: Add : usbhid start:BF053000 len: 20476 time: 4294938200 hash: 48 00 14 67

[    9.327393] usbcore: registered new interface driver usbhid

[    9.333000] usbhid: USB HID core driver

    [OK]

Loading kernel module scsi_mod                                          [    9.396512] digsig_add_module_runtime: Add : scsi_mod start:BF05D000 len: 64616 time: 4294938208 hash: 71 A0 B1 59

[    9.436802] SCSI subsystem initialized

    [OK]

Loading kernel module sd_mod                                            [    9.473581] digsig_add_module_runtime: Add : sd_mod start:BF078000 len: 22452 time: 4294938217 hash: 7E 92 76 2F

    [OK]

Loading kernel module usb-storage                                       [    9.541146] digsig_add_module_runtime: Add : usb_storage start:BF082000 len: 21200 time: 4294938224 hash: 23 64 64 F8

[    9.554447] Initializing USB Mass Storage driver...

[    9.567354] usbcore: registered new interface driver usb-storage

[    9.573398] USB Mass Storage support registered.

    [OK]

Loading kernel module nls_cp437                                         [    9.606264] digsig_add_module_runtime: Add : nls_cp437 start:BF08F000 len: 4044 time: 4294938230 hash: 28 E4 6C 5F

    [OK]

Loading kernel module nls_iso8859-1                                     [    9.643997] digsig_add_module_runtime: Add : nls_iso8859_1 start:BF094000 len: 2512 time: 4294938234 hash: 47 73 51 9F

    [OK]

Loading kernel module nls_utf8                                          [    9.681771] digsig_add_module_runtime: Add : nls_utf8 start:BF098000 len: 200 time: 4294938238 hash: 52 62 5D 4E

    [OK]

Loading kernel module fat                                               [    9.731570] digsig_add_module_runtime: Add : fat start:BF09C000 len: 39980 time: 4294938242 hash: E2 24 27 54

    [OK]

Loading kernel module msdos                                             [    9.789824] digsig_add_module_runtime: Add : msdos start:BF0AB000 len: 5052 time: 4294938249 hash: A1 FA AE 79

[    9.802405] PHY eth0: link status:1 Autoneg 1 100base-FD

[    9.819421] CONTEXT eth0: link available: 100base-FD

    [OK]

Loading kernel module vfat                                              [    9.854120] digsig_add_module_runtime: Add : vfat start:BF0B0000 len: 7600 time: 4294938255 hash: 98 F9 49 75

    [OK]

Loading kernel module mmc-core                                          [    9.909345] digsig_add_module_runtime: Add : mmc_core start:BF0B6000 len: 48016 time: 4294938260 hash: D8 5A 1E F4

    [OK]

Loading kernel module mmc-block                                         [    9.978902] digsig_add_module_runtime: Add : mmc_block start:BF0C9000 len: 10660 time: 4294938268 hash: B1 27 99 19

    [OK]

Loading kernel module sdhci                                             [   10.031775] digsig_add_module_runtime: Add : sdhci start:BF0CF000 len: 17304 time: 4294938273 hash: 83 E0 B2 C3

[   10.044517] sdhci: Secure Digital Host Controller Interface driver

[   10.050882] sdhci: Copyright(c) Pierre Ossman

    [OK]

Loading kernel module sdhci-platform                                    [   10.083082] digsig_add_module_runtime: Add : sdhci_platform start:BF0D7000 len: 1232 time: 4294938278 hash: 6E 7E 16 1B

[   10.097889] mmc0: SDHCI Spec version 2 detected, but forcing version 2.0

[   10.122893] Registered led device: mmc0::

[   10.130078] mmc0: SDHCI controller on platform [sdhci-bcm589x.0] using DMA

[   10.138321] mmc1: SDHCI Spec version 2 detected, but forcing version 2.0

[   10.163983] Registered led device: mmc1::

[   10.172211] mmc1: SDHCI controller on platform [sdhci-bcm589x.1] using DMA

    [OK]

Starting service udev                                                   [FAILED]

/etc/hwprofile/common/hwprofile-init.sh: /etc/hwprofile/current/startup.sh: line 61: /sbin/udevd: not found

Starting coldplug                                                       [FAILED]

/etc/hwprofile/common/hwprofile-init.sh: /etc/hwprofile/current/startup.sh: line 62: /sbin/udevadm: not found

Starting DBUS Generate UUID                                                 [OK]

Starting service DBUS                                                       [OK]

Please press Enter to activate this console.
Need to load insmod cdc-acm.ko and spidev.ko

# find | grep -i spidev
./lib/modules/3.0.17/kernel/drivers/spi/spidev.ko

# insmod spidev.ko
[  341.329569] digsig_add_module_runtime: Add : spidev start:BF0E2000 len: 3288 time: 4107 hash: C8 9E 0F D4

#

# find | grep -i acm

./lib/modules/3.0.17/kernel/drivers/usb/class/cdc-acm.ko

# cd ./lib/modules/3.0.17/kernel/drivers/usb/class/cdc-acm.ko./lib/modules/3.0.1

7/kernel/drivers/usb/class/cdc-acm.ko

# cd ./lib/modules/3.0.17/kernel/drivers/usb/class/

# insmod cdc-acm.ko

[   60.571449] digsig_add_module_runtime: Add : cdc_acm start:BF0DB000 len: 11220 time: 4294943327 hash: 31 2B AA 11

[   60.593265] usbcore: registered new interface driver cdc_acm

[   60.599069] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

# find | grep -i equinox
./lib/modules/3.0.17/kernel/drivers/equinox
./lib/modules/3.0.17/kernel/drivers/equinox/nfc
./lib/modules/3.0.17/kernel/drivers/equinox/nfc/equinox_nfc.ko
./lib/modules/3.0.17/kernel/drivers/equinox/smartcard
./lib/modules/3.0.17/kernel/drivers/equinox/smartcard/equinox_scifm_hw.ko
./lib/modules/3.0.17/kernel/drivers/equinox/smartcard/equinox_scifm.ko
./lib/modules/3.0.17/kernel/drivers/equinox/security
./lib/modules/3.0.17/kernel/drivers/equinox/security/secmod
./lib/modules/3.0.17/kernel/drivers/equinox/security/secmod/security_service.ko
./lib/modules/3.0.17/kernel/drivers/equinox/osal
./lib/modules/3.0.17/kernel/drivers/equinox/osal/equinox_osal.ko
./lib/modules/3.0.17/kernel/drivers/equinox/msradc
./lib/modules/3.0.17/kernel/drivers/equinox/msradc/equinox_msradc.ko
Load extra kernel mode for modem to show at /dev/ttyACMx
lease press Enter to activate this console.
#
#
#
#
# find | grep -i acm
./lib/modules/3.0.17/kernel/drivers/usb/class/cdc-acm.ko
cd# insmod
# insmod ./lib/modules/3.0.17/kernel/drivers/usb/class/cdc-acm.ko
[   56.970212] digsig_add_module_runtime: Add : cdc_acm start:BF0DB000 len: 11220 time: 4294942967 hash: 31 2B AA 11
[   56.987490] usbcore: registered new interface driver cdc_acm
[   56.993187] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
# cd /
# find | grep -i spidev
./lib/modules/3.0.17/kernel/drivers/spi/spidev.ko
# insmod ./lib/modules/3.0.17/kernel/drivers/spi/spidev.ko
[   88.801531] digsig_add_module_runtime: Add : spidev start:BF0E2000 len: 3288 time: 4294946150 hash: C8 9E 0F D4
#
# ls /dev
bus                 ptmx                tty                 usb1
console             pts                 tty0                usb2
cpu_dma_latency     random              tty1                usbdev1.1
full                rtc0                tty2                usbdev2.1
hwrng               shm                 tty3                vcs
kmsg                ss_kek              ttyAMA0             vcs1
mem                 ss_mem              ttyAMA1             vcsa
network_latency     ss_pin              ttyAMA2             vcsa1
network_throughput  ss_rng              ttyAMA3             zero
null                ss_spak             urandom
# lsusb
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
# [  120.986493] usb 1-1: new full speed USB device number 2 using bcm589x-ohci
[  121.187608] usb 1-1: New USB device found, idVendor=0451, idProduct=f432
[  121.194369] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  121.201577] usb 1-1: Product: Texas Instruments MSP-FET430UIF
[  121.207375] usb 1-1: Manufacturer: Texas Instruments
[  121.212358] usb 1-1: SerialNumber: 9DFF427A4D10391D
[  121.232164] cdc_acm 1-1:1.0: This device cannot do calls on its own. It is not a modem.
[  121.240328] cdc_acm 1-1:1.0: No union descriptor, testing for castrated device
[  121.248191] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[  131.336621] generic-usb 0003:0451:F432.0001: usb_submit_urb(ctrl) failed
[  131.343395] generic-usb 0003:0451:F432.0001: timeout initializing reports
[  131.357538] generic-usb 0003:0451:F432.0001: hiddev0: USB HID v1.01 Device [Texas Instruments Texas Instruments MSP-FET430UIF] on usb-bcm589x-1/input1

# lsusb
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0451:f432 Texas Instruments, Inc. eZ430 Development Tool
#
#

U-Boot 1.1.4 (Ju