Kernel panic on Ubuntu_Equinox64

When download uImage into the target and almost finished the kernel panic because No filesystem could mount into root.
[    6.355357] No filesystem could mount root, tried:
[    6.360285] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)


 Details:
[    2.393858] Read value 0x0000006e on port 7
[    2.398089] Read value 0x00000075 on port 7
[    2.402296] Read value 0x00000070 on port 7
[    2.406526] Read value 0x0000006e on port 7
[    2.410733] Read value 0x0000006f on port 7
[    2.414963] Read value 0x00000070 on port 7
[    2.419170] Read value 0x0000006e on port 7
[    2.423376] Read value 0x00000072 on port 7
[    2.427607] Read value 0x0000006b on port 7
[    2.431814] Read value 0x0000006f on port 7
[    2.436908] bcm589x-bbl bcm589x-bbl: BBL hardware initialized
[    2.508221] NET: Registered protocol family 38
[    2.514900] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    2.522344] io scheduler noop registered
[    2.526545] io scheduler deadline registered
[    2.531080] io scheduler cfq registered (default)
[    2.536079] bcm589x-gpio bcm589x-gpio: Initialized chip 589x with GPIO lines 0:114
[    2.548563] uart-pl011 uart0: DMA channel TX dma1chan0
[    2.553754] uart-pl011 uart0: DMA channel RX dma1chan1
[    2.559295] uart-pl011 uart1: DMA channel TX dma1chan2
[    2.564632] uart-pl011 uart1: DMA channel RX dma1chan3
[    2.569809] uart-pl011 uart2: DMA channel TX dma1chan4
[    2.575054] uart-pl011 uart2: DMA channel RX dma1chan5
[    2.580228] uart-pl011 uart3: DMA channel TX dma1chan6
[    2.585456] uart-pl011 uart3: DMA channel RX dma1chan7
[    2.592554] bcm589x_mac: MAC addr: 00:0a:f7:00:01:66
[    2.600241] bcm589x_mac_mdio: probed
[    2.607142] bcm589x-rtc bcm589x-rtc: rtc core: registered bcm589x-rtc as rtc0
[    2.616072] Registered led device: bcm589x:msr
[    2.621324] Registered led device: bcm589x:keypad
[    2.626827] ss_proxy_init: Security Service device Version: AA0100AA !
[    2.697114] ss_kernel_verify_sbi: Final SBI check success!
[    2.703817] Certificate used earlier than allowed (2(now)<1327085672)
[    2.722817] ss_kernel_cert_init: Lib success !
[    2.727345] ss_kernel_cfg_create: sys/kernel/syscfg ...
[    2.732609] ss_kernel_spak_get_security_standard: Can not find security standard!!
[    2.740249] ss_kernel_cfg_set_security_standard: PCI : len: 3 Ver: 3.1 : len: 3
[    3.244701] ss_kernel_rng_init
[    3.256718] ss_kernel_tamper_init
[    3.261658] ss_kernel_kek_init
[    3.265923] ss_kernel_mem_init
[    3.270174] ss_kernel_spak_drv_init
[    3.274664] ss_kernel_pin_init
[    3.278958] input: ss_pin as /devices/virtual/input/input0
[    3.285692] TCP cubic registered
[    3.291862] bcm589x-rtc bcm589x-rtc: setting system clock to 1970-01-01 00:00:00 UTC (0)
[    3.315230] IP-Config: Gateway not on directly connected network.
[    3.322026] Waiting 3sec before mounting root device...
[    5.295187] PHY eth0: link status:1 Autoneg 1 100base-FD
[    5.312399] CONTEXT eth0: link available: 100base-FD
[    6.345407] VFS: Unable to mount root fs via NFS, trying floppy.
[    6.351648] List of all partitions:
[    6.355357] No filesystem could mount root, tried:
[    6.360285] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
[    6.368720] [<c002867c>] (unwind_backtrace+0x0/0xf0) from [<c023caf0>] (panic+0x64/0x17c)
[    6.377014] [<c023caf0>] (panic+0x64/0x17c) from [<c0008d1c>] (mount_block_root+0x1d4/0x214)
[    6.385544] [<c0008d1c>] (mount_block_root+0x1d4/0x214) from [<c0008e00>] (mount_root+0xa4/0xc8)
[    6.394415] [<c0008e00>] (mount_root+0xa4/0xc8) from [<c0008f44>] (prepare_namespace+0x120/0x184)
[    6.403343] [<c0008f44>] (prepare_namespace+0x120/0x184) from [<c000895c>] (kernel_init+0xe4/0x118)
[    6.412472] [<c000895c>] (kernel_init+0xe4/0x118) from [<c0023eec>] (kernel_thread_exit+0x0/0x8)

Write/Read into Modem /dev

When modem connected there are 7 devices but only the lowest to send AT command (it is verified by ublox engineer)
$ ls /dev/ttyA*
/dev/ttyACM0 /dev/ttyACM1 /dev/ttyACM2 /dev/ttyACM3 /dev/ttyACM4 /dev/ttyACM5 /dev/ttyACM6
$lsusb
tovantran@Satellite:~/workspace/DevMem2/Debug$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 04f2:b008 Chicony Electronics Co., Ltd USB 2.0 Camera
Bus 001 Device 028: ID 1546:1102 U-Blox AG
Bus 002 Device 006: ID 03f0:8207 Hewlett-Packard FHA-3510 2.4GHz Wireless Optical Mobile Mouse

We can send only /dev/ttyACM0 to ttyACM1 just to be sure. Otherwise, a segment faults.

~/workspace/Debug$ dmesg | tail
[189730.256400] cdc_acm 1-2:1.4: This device cannot do calls on its own. It is not a modem.
[189730.256592] cdc_acm 1-2:1.4: ttyACM2: USB ACM device
[189730.258258] cdc_acm 1-2:1.6: This device cannot do calls on its own. It is not a modem.
[189730.258441] cdc_acm 1-2:1.6: ttyACM3: USB ACM device
[189730.260299] cdc_acm 1-2:1.8: This device cannot do calls on its own. It is not a modem.
[189730.260505] cdc_acm 1-2:1.8: ttyACM4: USB ACM device
[189730.262128] cdc_acm 1-2:1.10: This device cannot do calls on its own. It is not a modem.
[189730.262326] cdc_acm 1-2:1.10: ttyACM5: USB ACM device
[189730.264155] cdc_acm 1-2:1.12: This device cannot do calls on its own. It is not a modem.
[189730.264370] cdc_acm 1-2:1.12: ttyACM6: USB ACM device

[180001.228352] ublox[3986]: segfault at 0 ip b74a4090 sp bfd91eb0 error 4 in libc-2.15.so[b7440000+19f000]
[180099.905586] ublox[4010]: segfault at 0 ip b74d5090 sp bfb62880 error 4 in libc-2.15.so[b7471000+19f000]
[180398.947134] ublox[4108]: segfault at 0 ip b74e3090 sp bfc35a60 error 4 in libc-2.15.so[b747f000+19f000]
[180403.812155] ublox[4110]: segfault at 0 ip b74f4090 sp bfdcb780 error 4 in libc-2.15.so[b7490000+19f000]
[184633.997560] ublox1[5188]: segfault at 0 ip b753a028 sp bff8828c error 4 in libc-2.15.so[b74af000+19f000]
[184674.220633] ublox1[5239]: segfault at 0 ip b7593028 sp bfd1183c error 4 in libc-2.15.so[b7508000+19f000]
[184714.869225] ublox[5259]: segfault at 0 ip b7565028 sp bfa779ac error 4 in libc-2.15.so[b74da000+19f000]
[184732.112691] ublox[5271]: segfault at 0 ip b7596028 sp bf9cb81c error 4 in libc-2.15.so[b750b000+19f000]
[184754.141909] ublox[5283]: segfault at 0 ip b7582028 sp bfebe0ac error 4 in libc-2.15.so[b74f7000+19f000]
[184761.357642] ublox1[5294]: segfault at 0 ip b7515028 sp bfae886c error 4 in libc-2.15.so[b748a000+19f000]
[185460.303513] modem[5539]: segfault at 0 ip b766a090 sp bfe1e0e0 error 4 in libc-2.15.so[b7606000+19f000]
Before write to modem need to chmod  to read/write by everyone
tovantran@Satellite:~/Ctest$ sudo chmod 666 /dev/ttyACM0
[sudo] password for tovantran:
tovantran@Satellite:~/Ctest$ ./ublox1
opening modem
modem open
1, ./ublox1, AT
AT
OK
tovantran@Satellite:~/Ctest$

Board brings up

- Check all the jumpers with a good board since we don't have schematic.
- set environment first before download uImage using tftp
bcm5892# setenv ipaddr 10.100.100.55;setenv serverip 10.100.100.184;setenv ethaddr 00:0A:F7:00:01:66;setenv bootargs mem=128M console=ttyAMA0,115200n8 root=/dev/nfs rootdelay=3 nfsroot=10.100.100.184:/tftpboot/fs,tcp ip=10.100.100.55:10.100.100.184:10.100.100.1:255.255.255.0:equinox:eth0:off board=APOLLO12X debug earlyprink;setenv linux 'tftp 42000000 uImage; bootm'
Target address: 10.100.100.55 (nfsroot)
netmask: 255.255.255.0
gateway: 10.100.100.1
broadcast: 10.100.100.255
bcm5892# run linux
Ref.
Start up kernel syslog
12x12 Hardware Bringup and Test 

Setup 

Wrong Jumper causing USB to be disabled. Kernel can not assign irq 59 and time out after.

This is good syslog with 2 USB ports assigned by kernel.

[    8.911286] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    8.917897] bcm589x-ohci bcm589x-ohci.1: BCM589x USB-OHCI

[    8.923411] bcm589x-ohci bcm589x-ohci.1: new USB bus registered, assigned bus number 1

[    8.931594] bcm589x-ohci bcm589x-ohci.1: irq 59, io mem 0x000b1000

[    9.000544] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001

[    9.007446] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    9.014692] usb usb1: Product: BCM589x USB-OHCI

[    9.019267] usb usb1: Manufacturer: Linux 3.0.17 BCM589x USB-OHCI

[    9.025381] usb usb1: SerialNumber: bcm589x

[    9.043711] hub 1-0:1.0: USB hub found

[    9.047677] hub 1-0:1.0: 1 port detected

[    9.057826] bcm589x-ohci bcm589x-ohci.2: BCM589x USB-OHCI

[    9.063339] bcm589x-ohci bcm589x-ohci.2: new USB bus registered, assigned bus number 2

[    9.071546] bcm589x-ohci bcm589x-ohci.2: irq 60, io mem 0x000b2000

[    9.140539] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001

[    9.147455] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    9.154703] usb usb2: Product: BCM589x USB-OHCI

[    9.159284] usb usb2: Manufacturer: Linux 3.0.17 BCM589x USB-OHCI

[    9.165398] usb usb2: SerialNumber: bcm589x

[    9.183727] hub 2-0:1.0: USB hub found

[    9.187683] hub 2-0:1.0: 1 port detected

    [OK]
# lsusb
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

.config template

It is hidden file nautilus/dolphin ctrl-h to show, this is output of
make linux-menuconfig (others: make xconfig, make menuconfig, make busybox-menuconfig)

There are 2 .config files: /output/build/linux-custom & /buildroot
tovantran@Satellite:~/Equinox/buildroot-2012.05/output/build/linux-custom$ gedit .config

#
# Automatically generated make config: don't edit
# Linux/arm 3.0.17 Kernel Configuration
#
CONFIG_ARM=y
CONFIG_HAVE_PWM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_HAVE_SCHED_CLOCK=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_KTIME_SCALAR=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_FIQ=y
CONFIG_VECTORS_BASE=0xffff0000
# CONFIG_ARM_PATCH_PHYS_VIRT is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_FHANDLE is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_SHOW=y
# CONFIG_SPARSE_IRQ is not set

#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="/home/tovantran/Equinox/buildroot-2012.05/output/images/rootfs.cpio"
CONFIG_INITRAMFS_ROOT_UID=0
CONFIG_INITRAMFS_ROOT_GID=0
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
CONFIG_INITRAMFS_COMPRESSION_GZIP=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y

#
# GCOV-based kernel profiling
#
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y

#
# System Type
#
CONFIG_MMU=y
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_AT91 is not set
CONFIG_ARCH_BCM589X=y
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CNS3XXX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_MXS is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P64X0 is not set
# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_EXYNOS4 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_TCC_926 is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_PLAT_SPEAR is not set
# CONFIG_ARCH_VT8500 is not set

#
# BCM589X Core
#
CONFIG_BCM_RAM_BASE=0x40000000
# CONFIG_INTERRUPT_LATENCY_MEASUREMENT is not set
# CONFIG_GPIO_PCA953X is not set

#
# System MMU
#
CONFIG_ARM_TIMER_SP804=y

#
# Processor Type
#
CONFIG_CPU_V6=y
CONFIG_CPU_32v6=y
CONFIG_CPU_ABRT_EV6=y
CONFIG_CPU_PABRT_V6=y
CONFIG_CPU_CACHE_V6=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V6=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_USE_DOMAINS=y

#
# Processor Features
#
CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_CPU_HAS_PMU=y
CONFIG_ARM_ERRATA_411920=y

#
# Bus support
#
CONFIG_ARM_AMBA=y
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set

#
# Kernel Features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_HAVE_ARCH_PFN_VALID=y
# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_UACCESS_WITH_MEMCPY is not set
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_DEPRECATED_PARAM_STRUCT is not set

#
# Boot options
#
# CONFIG_USE_OF is not set
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE=""
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_AUTO_ZRELADDR is not set

#
# CPU Power Management
#
# CONFIG_CPU_IDLE is not set

#
# Floating point emulation
#

#
# At least one emulation must be selected
#
# CONFIG_FPE_NWFPE is not set
# CONFIG_FPE_FASTFPE is not set
# CONFIG_VFP is not set

#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set

#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_PM_SLEEP=y
# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_APM_EMULATION is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y

#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_DNS_RESOLVER is not set
# CONFIG_BATMAN_ADV is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=y

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=y
# CONFIG_BT_MRVL is not set
# CONFIG_BT_ATH3K is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set

#
# Device Drivers
#
CONFIG_EQUINOX_DRIVERS=y
CONFIG_NFC_EQUINOX=m
# CONFIG_NFC_EQUINOX_EMV_VERSIONED is not set
CONFIG_NFC_EQUINOX_EMV_UNVERSIONED=y

#
# Security Service
#
CONFIG_SECURITY_SERVICE=y
CONFIG_SECURITY_SERVICE_CORE=m
CONFIG_SCIFM_EQUINOX=m
CONFIG_MSRADC_EQUINOX=m
CONFIG_TRACE_EQUINOX=m

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/mdev"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set

#
# User Modules And Translation Layers
#
# CONFIG_MTD_CHAR is not set
# CONFIG_MTD_BLKDEVS is not set
# CONFIG_MTD_BLOCK is not set
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set

#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_RAM=m
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PLATRAM=m

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_DATAFLASH is not set
CONFIG_MTD_M25P80=m
CONFIG_M25PXX_USE_FAST_READ=y
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_BCH is not set
# CONFIG_MTD_SM_COMMON is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set

#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set

#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MG_DISK is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=m
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
CONFIG_MII=y
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_ENC28J60 is not set
# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_FTMAC100 is not set
CONFIG_BCM589X_ETH=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_WAN is not set

#
# CAIF transport drivers
#
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_MPPE=y
CONFIG_PPPOE=y
# CONFIG_SLIP is not set
CONFIG_SLHC=y
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_NR_TTY_DEVICES=3
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_AMBA_PL010 is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX3107 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_HVC_DCC is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_RAMOOPS is not set
CONFIG_TDA8026=m
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y

#
# I2C Hardware Bus support
#

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
CONFIG_I2C_BCM589X=m

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_OC_TINY is not set
CONFIG_SPI_PL022=m
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#

#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_BASIC_MMIO is not set
CONFIG_GPIO_BCM589X=y
# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_PL061 is not set

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_ADP5588 is not set

#
# PCI GPIO expanders:
#

#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
# CONFIG_MFD_SUPPORT is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_WMT_GE_ROPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
CONFIG_FB_ARMCLCD=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PWM=y
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_QUANTA is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_ROCCAT_ARVO is not set
# CONFIG_HID_ROCCAT_KONE is not set
# CONFIG_HID_ROCCAT_KONEPLUS is not set
# CONFIG_HID_ROCCAT_KOVAPLUS is not set
# CONFIG_HID_ROCCAT_PYRA is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_BCM589X_OHCI=y

#
# Enable Host or Gadget support to see Inventra options
#
# CONFIG_USB_MUSB_HDRC is not set

#
# Enable Host or Gadget support for DesignWare OTG controller
#
# CONFIG_USB_DWC_OTG is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_EZUSB is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ULPI is not set
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_ARMMMCI is not set
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_SDHCI_BCM589X=y
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_DW is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_GPIO_PLATFORM=y
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_NFC_DEVICES is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_PL030 is not set
# CONFIG_RTC_DRV_PL031 is not set
CONFIG_RTC_DRV_BCM589X=y
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_AMBA_PL08X=y
# CONFIG_TIMB_DMA is not set
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
# CONFIG_NET_DMA is not set
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
CONFIG_CLKSRC_MMIO=y

#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m

#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_LL is not set
# CONFIG_OC_ETM is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_IMA is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
# CONFIG_AVERAGE is not set
-------------------------------------------------------------------------------------------------
tovantran@Satellite:~/Equinox/buildroot-2012.05$ gedit .config
 #
# Automatically generated make config: don't edit
# Buildroot 2012.05 Configuration
#
BR2_HAVE_DOT_CONFIG=y
BR2_arm=y
# BR2_armeb is not set
# BR2_avr32 is not set
# BR2_bfin is not set
# BR2_i386 is not set
# BR2_microblazeel is not set
# BR2_microblazebe is not set
# BR2_mips is not set
# BR2_mipsel is not set
# BR2_powerpc is not set
# BR2_sh is not set
# BR2_sh64 is not set
# BR2_sparc is not set
# BR2_x86_64 is not set
# BR2_generic_arm is not set
# BR2_arm7tdmi is not set
# BR2_arm610 is not set
# BR2_arm710 is not set
# BR2_arm720t is not set
# BR2_arm920t is not set
# BR2_arm922t is not set
# BR2_arm926t is not set
# BR2_arm10t is not set
BR2_arm1136jf_s=y
# BR2_arm1176jz_s is not set
# BR2_arm1176jzf_s is not set

#
# cortex-A8/A9 needs gcc >= 4.4.x
#
# BR2_cortex_a8 is not set
# BR2_cortex_a9 is not set
# BR2_sa110 is not set
# BR2_sa1100 is not set
# BR2_xscale is not set
# BR2_iwmmxt is not set
BR2_ARM_TYPE="ARM1136JF_S"
BR2_ARM_EABI=y
# BR2_ARM_OABI is not set
BR2_ARCH="arm"
BR2_ENDIAN="LITTLE"
BR2_GCC_TARGET_TUNE="arm1136jf-s"
BR2_GCC_TARGET_ARCH="armv6j"
BR2_GCC_TARGET_ABI="aapcs-linux"

#
# Build options
#

#
# Commands
#
BR2_WGET="wget --passive-ftp -nd -t 3"
BR2_SVN="svn"
BR2_BZR="bzr"
BR2_GIT="git"
BR2_LOCALFILES="cp"
BR2_SCP="scp"
BR2_SSH="ssh"
BR2_HG="hg"
BR2_ZCAT="gzip -d -c"
BR2_BZCAT="bzcat"
BR2_XZCAT="xzcat"
BR2_TAR_OPTIONS=""
BR2_DL_DIR="$(TOPDIR)/dl"
BR2_HOST_DIR="$(BASE_DIR)/host"

#
# Mirrors and Download locations
#
BR2_PRIMARY_SITE=""
BR2_BACKUP_SITE="http://sources.buildroot.net/"
BR2_SOURCEFORGE_MIRROR="kent"
BR2_KERNEL_MIRROR="http://www.kernel.org/pub/"
BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu"
BR2_DEBIAN_MIRROR="http://ftp.debian.org"
BR2_JLEVEL=2
# BR2_CCACHE is not set
# BR2_DEPRECATED is not set
# BR2_ENABLE_DEBUG is not set
BR2_STRIP_strip=y
# BR2_STRIP_sstrip is not set
# BR2_STRIP_none is not set
# BR2_OPTIMIZE_0 is not set
# BR2_OPTIMIZE_1 is not set
# BR2_OPTIMIZE_2 is not set
# BR2_OPTIMIZE_3 is not set
BR2_OPTIMIZE_S=y
# BR2_PREFER_STATIC_LIB is not set
# BR2_HAVE_DOCUMENTATION is not set
# BR2_HAVE_DEVFILES is not set
BR2_PACKAGE_OVERRIDE_FILE="$(TOPDIR)/local.mk"

#
# Toolchain
#
# BR2_TOOLCHAIN_BUILDROOT is not set
# BR2_TOOLCHAIN_EXTERNAL is not set
BR2_TOOLCHAIN_CTNG=y
# BR2_TOOLCHAIN_CTNG_uClibc is not set
BR2_TOOLCHAIN_CTNG_eglibc=y
# BR2_TOOLCHAIN_CTNG_glibc is not set
BR2_TOOLCHAIN_CTNG_LIBC="eglibc"
BR2_TOOLCHAIN_CTNG_CONFIG="toolchain/toolchain-crosstool-ng/crosstool-ng.config-uClibc"
BR2_TOOLCHAIN_CTNG_CXX=y
# BR2_TOOLCHAIN_CTNG_THREADS_PTHREADS is not set
BR2_TOOLCHAIN_CTNG_THREADS_NPTL=y

#
# Gdb Options
#
# BR2_PACKAGE_GDB is not set
# BR2_PACKAGE_GDB_SERVER is not set
# BR2_PACKAGE_GDB_HOST is not set
BR2_LARGEFILE=y
BR2_INET_IPV6=y
BR2_INET_RPC=y
BR2_USE_WCHAR=y
BR2_ENABLE_LOCALE=y
BR2_INSTALL_LIBSTDCPP=y
BR2_TOOLCHAIN_HAS_THREADS=y
BR2_TOOLCHAIN_HAS_THREADS_DEBUG_IF_NEEDED=y
BR2_TOOLCHAIN_HAS_SHADOW_PASSWORDS=y
# BR2_ENABLE_LOCALE_PURGE is not set
BR2_GENERATE_LOCALE=""
BR2_USE_MMU=y
BR2_PREFER_SOFT_FLOAT=y
BR2_SOFT_FLOAT=y
BR2_TARGET_OPTIMIZATION="-pipe"
BR2_TARGET_LDFLAGS=""

#
# System configuration
#
BR2_TARGET_GENERIC_HOSTNAME="apollo"
BR2_TARGET_GENERIC_ISSUE="Welcome to Apollo"
# BR2_ROOTFS_DEVICE_CREATION_STATIC is not set
# BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS is not set
# BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV is not set
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV=y
BR2_ROOTFS_DEVICE_TABLE="board/equinoxpayments/l5000/device_table.txt"
# BR2_ROOTFS_SKELETON_DEFAULT is not set
BR2_ROOTFS_SKELETON_CUSTOM=y
BR2_ROOTFS_SKELETON_CUSTOM_PATH="board/equinoxpayments/skeleton"
BR2_ROOTFS_POST_BUILD_SCRIPT=""

#
# Package Selection for the target
#
BR2_PACKAGE_BUSYBOX=y
# BR2_BUSYBOX_VERSION_1_19_X is not set
BR2_BUSYBOX_VERSION_1_20_X=y
# BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
BR2_BUSYBOX_VERSION="1.20.1"
BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.20.x.config"
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
# BR2_PACKAGE_BUSYBOX_WATCHDOG is not set

#
# Audio and video applications
#
# BR2_PACKAGE_ALSA_UTILS is not set
# BR2_PACKAGE_AUMIX is not set
# BR2_PACKAGE_BELLAGIO is not set
# BR2_PACKAGE_FAAD2 is not set
# BR2_PACKAGE_FLAC is not set
# BR2_PACKAGE_FFMPEG is not set
# BR2_PACKAGE_GSTREAMER is not set
# BR2_PACKAGE_LAME is not set
# BR2_PACKAGE_MADPLAY is not set
# BR2_PACKAGE_MPD is not set
# BR2_PACKAGE_MPG123 is not set
# BR2_PACKAGE_MPLAYER is not set
# BR2_PACKAGE_MUSEPACK is not set
# BR2_PACKAGE_PULSEAUDIO is not set
# BR2_PACKAGE_VORBIS_TOOLS is not set
# BR2_PACKAGE_WAVPACK is not set

#
# Compressors and decompressors
#
# BR2_PACKAGE_BZIP2 is not set
# BR2_PACKAGE_GZIP is not set
# BR2_PACKAGE_LZOP is not set
# BR2_PACKAGE_XZ is not set

#
# Debugging, profiling and benchmark
#
# BR2_PACKAGE_BONNIE is not set
# BR2_PACKAGE_DHRYSTONE is not set
# BR2_PACKAGE_DSTAT is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_KEXEC is not set
# BR2_PACKAGE_LATENCYTOP is not set
# BR2_PACKAGE_LMBENCH is not set
# BR2_PACKAGE_LSOF is not set
# BR2_PACKAGE_LTP_TESTSUITE is not set
# BR2_PACKAGE_LTTNG_MODULES is not set
# BR2_PACKAGE_LTRACE is not set
# BR2_PACKAGE_MEMSTAT is not set
# BR2_PACKAGE_NETPERF is not set
# BR2_PACKAGE_OPROFILE is not set
# BR2_PACKAGE_RT_TESTS is not set
# BR2_PACKAGE_STRACE is not set
# BR2_PACKAGE_STRESS is not set
# BR2_PACKAGE_WHETSTONE is not set
# BR2_PACKAGE_PV is not set

#
# Development tools
#
# BR2_PACKAGE_AUTOCONF is not set
# BR2_PACKAGE_AUTOMAKE is not set
# BR2_PACKAGE_BINUTILS is not set
# BR2_PACKAGE_BISON is not set
# BR2_PACKAGE_BSDIFF is not set
# BR2_PACKAGE_CCACHE is not set
# BR2_PACKAGE_COREUTILS is not set
# BR2_PACKAGE_CVS is not set
# BR2_PACKAGE_DIFFUTILS is not set
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_FINDUTILS is not set
# BR2_PACKAGE_FLEX is not set
# BR2_PACKAGE_GAWK is not set
# BR2_PACKAGE_GMP is not set
# BR2_PACKAGE_GPERF is not set
# BR2_PACKAGE_GREP is not set
# BR2_PACKAGE_MAKE is not set
# BR2_PACKAGE_MPC is not set
# BR2_PACKAGE_MPFR is not set
# BR2_PACKAGE_LIBTOOL is not set
# BR2_PACKAGE_M4 is not set
# BR2_PACKAGE_PATCH is not set
# BR2_PACKAGE_PKG_CONFIG is not set
# BR2_PACKAGE_SED is not set
# BR2_PACKAGE_SSTRIP is not set
# BR2_PACKAGE_TAR is not set

#
# Games
#
# BR2_PACKAGE_GNUCHESS is not set
# BR2_PACKAGE_PRBOOM is not set

#
# Graphic libraries and applications (graphic/text)
#

#
# Graphic applications
#
# BR2_PACKAGE_RRDTOOL is not set

#
# graphic libraries
#
# BR2_PACKAGE_DIRECTFB is not set
# BR2_PACKAGE_FBDUMP is not set
# BR2_PACKAGE_FBGRAB is not set
# BR2_PACKAGE_FBSET is not set
# BR2_PACKAGE_FBV is not set
# BR2_PACKAGE_IMAGEMAGICK is not set
# BR2_PACKAGE_LINUX_FUSION is not set
# BR2_PACKAGE_SDL is not set

#
# other GUIs
#
# BR2_PACKAGE_EFL is not set
# BR2_PACKAGE_QT is not set
# BR2_PACKAGE_XORG7 is not set

#
# X libraries and helper libraries
#
# BR2_PACKAGE_LIBERATION is not set

#
# X Window managers
#

#
# X applications
#
# BR2_PACKAGE_GOB2 is not set

#
# midori requires C++, WCHAR in toolchain and libgtk2
#
# BR2_PACKAGE_VALA is not set

#
# Hardware handling
#
# BR2_PACKAGE_CDRKIT is not set
# BR2_PACKAGE_CRAMFS is not set
BR2_PACKAGE_DBUS=y
BR2_DBUS_EXPAT=y
# BR2_DBUS_LIBXML2 is not set
BR2_PACKAGE_DBUS_GLIB=y
# BR2_PACKAGE_DEVMEM2 is not set
# BR2_PACKAGE_DMRAID is not set
# BR2_PACKAGE_DOSFSTOOLS is not set
# BR2_PACKAGE_E2FSPROGS is not set
# BR2_PACKAGE_EEPROG is not set
# BR2_PACKAGE_FCONFIG is not set
# BR2_PACKAGE_FIS is not set
# BR2_PACKAGE_FMTOOLS is not set
# BR2_PACKAGE_GADGETFS_TEST is not set
# BR2_PACKAGE_GDISK is not set
# BR2_PACKAGE_GENEXT2FS is not set
# BR2_PACKAGE_GENROMFS is not set
# BR2_PACKAGE_GPSD is not set
# BR2_PACKAGE_GVFS is not set
# BR2_PACKAGE_HDPARM is not set
BR2_PACKAGE_HWDATA=y
# BR2_PACKAGE_I2C_TOOLS is not set
# BR2_PACKAGE_INPUT_EVENT_DAEMON is not set
# BR2_PACKAGE_INPUT_TOOLS is not set
# BR2_PACKAGE_IOSTAT is not set
# BR2_PACKAGE_IRDA_UTILS is not set
# BR2_PACKAGE_KBD is not set
# BR2_PACKAGE_LCDPROC is not set
BR2_PACKAGE_LINUX_FIRMWARE=y

#
# Atheros
#
# BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_7010 is not set
# BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_9271 is not set

#
# Ralink
#
# BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT61 is not set
# BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73 is not set
# BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX is not set

#
# Texas Instruments
#
# BR2_PACKAGE_LINUX_FIRMWARE_TI_WL127X is not set
# BR2_PACKAGE_LINUX_FIRMWARE_TI_WL128X is not set
BR2_PACKAGE_LINUX_FIRMWARE_TI_CC256X=y
# BR2_PACKAGE_LM_SENSORS is not set
BR2_PACKAGE_LSUIO=y
# BR2_PACKAGE_LVM2 is not set
# BR2_PACKAGE_MAKEDEVS is not set
# BR2_PACKAGE_MDADM is not set
# BR2_PACKAGE_MEMTESTER is not set
BR2_PACKAGE_MINICOM=y
# BR2_PACKAGE_MTD is not set
# BR2_PACKAGE_NTFS_3G is not set
# BR2_PACKAGE_OPEN2300 is not set
# BR2_PACKAGE_OPENOCD is not set
# BR2_PACKAGE_PARTED is not set
# BR2_PACKAGE_PCIUTILS is not set
# BR2_PACKAGE_PICOCOM is not set
# BR2_PACKAGE_RNG_TOOLS is not set
# BR2_PACKAGE_SANE_BACKENDS is not set
# BR2_PACKAGE_SDPARM is not set
BR2_PACKAGE_SETSERIAL=y
# BR2_PACKAGE_SMARTMONTOOLS is not set
# BR2_PACKAGE_SQUASHFS is not set
# BR2_PACKAGE_SREDIRD is not set
# BR2_PACKAGE_SSHFS is not set
# BR2_PACKAGE_STATSERIAL is not set
# BR2_PACKAGE_SYSSTAT is not set
# BR2_PACKAGE_TI_UTILS is not set
# BR2_PACKAGE_UBOOT_TOOLS is not set
BR2_PACKAGE_UDEV=y
# BR2_PACKAGE_UDEV_RULES_GEN is not set
BR2_PACKAGE_UDEV_ALL_EXTRAS=y
# BR2_PACKAGE_UNIONFS is not set
BR2_PACKAGE_USB_MODESWITCH=y
BR2_PACKAGE_USBMOUNT=y
BR2_PACKAGE_USBUTILS=y
BR2_PACKAGE_USBUTILS_ZLIB=y
# BR2_PACKAGE_WIPE is not set
# BR2_PACKAGE_XFSPROGS is not set

#
# Interpreter languages and scripting
#
# BR2_PACKAGE_HASERL is not set
# BR2_PACKAGE_LUA is not set
# BR2_PACKAGE_MICROPERL is not set
# BR2_PACKAGE_PHP is not set
# BR2_PACKAGE_PYTHON is not set
# BR2_PACKAGE_RUBY is not set
# BR2_PACKAGE_TCL is not set

#
# Libraries
#

#
# Audio/Sound
#
# BR2_PACKAGE_ALSA_LIB is not set
# BR2_PACKAGE_AUDIOFILE is not set
# BR2_PACKAGE_LIBAO is not set
# BR2_PACKAGE_LIBCDAUDIO is not set
# BR2_PACKAGE_LIBCUE is not set
# BR2_PACKAGE_LIBCUEFILE is not set
# BR2_PACKAGE_LIBID3TAG is not set
# BR2_PACKAGE_LIBMAD is not set
# BR2_PACKAGE_LIBMPD is not set
# BR2_PACKAGE_LIBREPLAYGAIN is not set
# BR2_PACKAGE_LIBSAMPLERATE is not set
# BR2_PACKAGE_LIBSNDFILE is not set
# BR2_PACKAGE_LIBVORBIS is not set
# BR2_PACKAGE_PORTAUDIO is not set
# BR2_PACKAGE_SPEEX is not set
# BR2_PACKAGE_TAGLIB is not set
# BR2_PACKAGE_TREMOR is not set

#
# Compression and decompression
#
# BR2_PACKAGE_LIBARCHIVE is not set
# BR2_PACKAGE_LZO is not set
BR2_PACKAGE_ZLIB=y

#
# Crypto
#
# BR2_PACKAGE_BEECRYPT is not set
BR2_PACKAGE_GNUTLS=y
BR2_PACKAGE_LIBGCRYPT=y
BR2_PACKAGE_LIBGPG_ERROR=y
# BR2_PACKAGE_LIBNSS is not set
# BR2_PACKAGE_OCF_LINUX is not set
BR2_PACKAGE_OPENSSL=y
# BR2_PACKAGE_OPENSSL_BIN is not set
# BR2_PACKAGE_OPENSSL_ENGINES is not set
# BR2_PACKAGE_OPENSSL_OCF is not set
# BR2_PACKAGE_POLARSSL is not set

#
# Database
#
# BR2_PACKAGE_BERKELEYDB is not set
# BR2_PACKAGE_MYSQL_CLIENT is not set
# BR2_PACKAGE_SQLCIPHER is not set
# BR2_PACKAGE_SQLITE is not set

#
# Filesystem
#
# BR2_PACKAGE_GAMIN is not set
# BR2_PACKAGE_LIBCONFIG is not set
# BR2_PACKAGE_LIBCONFUSE is not set
# BR2_PACKAGE_LIBFUSE is not set
BR2_PACKAGE_LIBLOCKFILE=y
# BR2_PACKAGE_LIBSYSFS is not set

#
# Graphics
#
# BR2_PACKAGE_ATK is not set
# BR2_PACKAGE_CAIRO is not set
# BR2_PACKAGE_FONTCONFIG is not set
# BR2_PACKAGE_FREETYPE is not set
# BR2_PACKAGE_IMLIB2 is not set
# BR2_PACKAGE_JPEG is not set
# BR2_PACKAGE_LIBART is not set
# BR2_PACKAGE_LIBDMTX is not set
# BR2_PACKAGE_LIBEXIF is not set
# BR2_PACKAGE_LIBGEOTIFF is not set
# BR2_PACKAGE_GDK_PIXBUF is not set
# BR2_PACKAGE_LIBPNG is not set
# BR2_PACKAGE_LIBRAW is not set
# BR2_PACKAGE_LIBSVGTINY is not set
# BR2_PACKAGE_LIBUNGIF is not set
# BR2_PACKAGE_OPENCV is not set
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_PIXMAN is not set
# BR2_PACKAGE_TIFF is not set

#
# webkit requires C++, WCHAR in toolchain and libgtk2
#

#
# Hardware handling
#
BR2_PACKAGE_LIBAIO=y
# BR2_PACKAGE_LIBRAW1394 is not set
# BR2_PACKAGE_TSLIB is not set
BR2_PACKAGE_LIBFTDI=y
BR2_PACKAGE_LIBTFDI_CPP=y
BR2_PACKAGE_LIBHID=y
BR2_PACKAGE_LIBIQRF=y
BR2_PACKAGE_LIBUSB=y
BR2_PACKAGE_LIBUSB_COMPAT=y
# BR2_PACKAGE_LIBV4L is not set

#
# Javascript
#
# BR2_PACKAGE_EXPLORERCANVAS is not set
# BR2_PACKAGE_FLOT is not set
# BR2_PACKAGE_JQUERY is not set
# BR2_PACKAGE_JQUERY_SPARKLINE is not set
# BR2_PACKAGE_JQUERY_VALIDATION is not set
# BR2_PACKAGE_JSMIN is not set

#
# Multimedia
#
# BR2_PACKAGE_LIBDVDREAD is not set
# BR2_PACKAGE_LIBDVDNAV is not set
# BR2_PACKAGE_LIBMMS is not set
# BR2_PACKAGE_LIBMPEG2 is not set
# BR2_PACKAGE_LIBOGG is not set
# BR2_PACKAGE_LIBPLAYER is not set
# BR2_PACKAGE_LIBTHEORA is not set
# BR2_PACKAGE_LIVE555 is not set

#
# Networking
#
# BR2_PACKAGE_GLIB_NETWORKING is not set
# BR2_PACKAGE_LIBCGI is not set
# BR2_PACKAGE_LIBCGICC is not set
# BR2_PACKAGE_LIBCURL is not set
# BR2_PACKAGE_LIBDNET is not set
# BR2_PACKAGE_LIBESMTP is not set
# BR2_PACKAGE_LIBEXOSIP2 is not set
# BR2_PACKAGE_LIBFCGI is not set
# BR2_PACKAGE_LIBIDN is not set
# BR2_PACKAGE_LIBOAUTH is not set
# BR2_PACKAGE_LIBMICROHTTPD is not set
# BR2_PACKAGE_NEON is not set
# BR2_PACKAGE_LIBMNL is not set
# BR2_PACKAGE_LIBMODBUS is not set
# BR2_PACKAGE_LIBMBUS is not set
# BR2_PACKAGE_LIBNETFILTER_CONNTRACK is not set
# BR2_PACKAGE_LIBNFNETLINK is not set
BR2_PACKAGE_LIBNL=y
BR2_PACKAGE_LIBPCAP=y
# BR2_PACKAGE_LIBOSIP2 is not set
# BR2_PACKAGE_LIBRSYNC is not set
# BR2_PACKAGE_LIBSOUP is not set
# BR2_PACKAGE_LIBUPNP is not set
# BR2_PACKAGE_LIBVNCSERVER is not set
# BR2_PACKAGE_ZEROMQ is not set
BR2_PACKAGE_WVSTREAMS=y

#
# Other
#
# BR2_PACKAGE_APR is not set
# BR2_PACKAGE_APR_UTIL is not set
# BR2_PACKAGE_FFTW is not set
# BR2_PACKAGE_LIBARGTABLE2 is not set
# BR2_PACKAGE_ARGP_STANDALONE is not set
# BR2_PACKAGE_BOOST is not set
# BR2_PACKAGE_LIBATOMIC_OPS is not set
# BR2_PACKAGE_LIBCAP is not set
# BR2_PACKAGE_LIBCAP_NG is not set
# BR2_PACKAGE_LIBDAEMON is not set
# BR2_PACKAGE_LIBELF is not set
# BR2_PACKAGE_LIBEVENT is not set
# BR2_PACKAGE_LIBEV is not set
BR2_PACKAGE_LIBFFI=y
BR2_PACKAGE_LIBGLIB2=y
# BR2_PACKAGE_LIBICAL is not set
# BR2_PACKAGE_LIBNSPR is not set
# BR2_PACKAGE_LIBSIGC is not set
# BR2_PACKAGE_LIBTPL is not set
# BR2_PACKAGE_LIBURCU is not set
# BR2_PACKAGE_LTTNG_LIBUST is not set
# BR2_PACKAGE_ORC is not set
# BR2_PACKAGE_POCO is not set
# BR2_PACKAGE_PROTOBUF is not set

#
# Text and terminal handling
#
# BR2_PACKAGE_ENCHANT is not set
# BR2_PACKAGE_ICU is not set
BR2_PACKAGE_NCURSES=y
# BR2_PACKAGE_NCURSES_TARGET_PANEL is not set
# BR2_PACKAGE_NCURSES_TARGET_FORM is not set
# BR2_PACKAGE_NCURSES_TARGET_MENU is not set
# BR2_PACKAGE_NEWT is not set
# BR2_PACKAGE_PCRE is not set
# BR2_PACKAGE_POPT is not set
# BR2_PACKAGE_READLINE is not set
# BR2_PACKAGE_SLANG is not set

#
# JSON/XML
#
BR2_PACKAGE_EXPAT=y
# BR2_PACKAGE_EZXML is not set
# BR2_PACKAGE_JSON_C is not set
# BR2_PACKAGE_LIBROXML is not set
# BR2_PACKAGE_LIBXML2 is not set
# BR2_PACKAGE_LIBXSLT is not set
# BR2_PACKAGE_LIBYAML is not set
# BR2_PACKAGE_MXML is not set
# BR2_PACKAGE_XERCES is not set
# BR2_PACKAGE_YAJL is not set

#
# Miscellaneous
#
# BR2_PACKAGE_EMPTY is not set
# BR2_PACKAGE_SHARED_MIME_INFO is not set

#
# Networking applications
#
# BR2_PACKAGE_ARGUS is not set
# BR2_PACKAGE_AVAHI is not set
# BR2_PACKAGE_AXEL is not set
BR2_PACKAGE_BLUEZ_UTILS=y
BR2_PACKAGE_BLUEZ_UTILS_COMPAT=y
# BR2_PACKAGE_BLUEZ_UTILS_AUDIO is not set
BR2_PACKAGE_BLUEZ_UTILS_USB=y
# BR2_PACKAGE_BOA is not set
# BR2_PACKAGE_BIND is not set
# BR2_PACKAGE_BMON is not set
# BR2_PACKAGE_BRIDGE_UTILS is not set
# BR2_PACKAGE_BWM_NG is not set
# BR2_PACKAGE_CAN_UTILS is not set
# BR2_PACKAGE_CONNMAN is not set
# BR2_PACKAGE_CTORRENT is not set
# BR2_PACKAGE_CIFS_UTILS is not set
# BR2_PACKAGE_CONNTRACK_TOOLS is not set
# BR2_PACKAGE_CUPS is not set
# BR2_PACKAGE_DHCP is not set
# BR2_PACKAGE_DHCPDUMP is not set
# BR2_PACKAGE_DNSMASQ is not set
# BR2_PACKAGE_DROPBEAR is not set
# BR2_PACKAGE_EBTABLES is not set
# BR2_PACKAGE_ETHTOOL is not set
# BR2_PACKAGE_HEIRLOOM_MAILX is not set
# BR2_PACKAGE_HIAWATHA is not set
# BR2_PACKAGE_HOSTAPD is not set
# BR2_PACKAGE_IFPLUGD is not set
# BR2_PACKAGE_IGH_ETHERCAT is not set
# BR2_PACKAGE_IPERF is not set
# BR2_PACKAGE_IPROUTE2 is not set
# BR2_PACKAGE_IPSEC_TOOLS is not set
# BR2_PACKAGE_IPSET is not set
# BR2_PACKAGE_IPTABLES is not set
# BR2_PACKAGE_IW is not set
# BR2_PACKAGE_KISMET is not set
# BR2_PACKAGE_LIGHTTPD is not set
# BR2_PACKAGE_LINKS is not set
# BR2_PACKAGE_LRZSZ is not set
# BR2_PACKAGE_MII_DIAG is not set
# BR2_PACKAGE_MROUTED is not set
# BR2_PACKAGE_MSMTP is not set
# BR2_PACKAGE_MUTT is not set
# BR2_PACKAGE_NBD is not set
# BR2_PACKAGE_NCFTP is not set
# BR2_PACKAGE_NDISC6 is not set
# BR2_PACKAGE_NETCAT is not set
# BR2_PACKAGE_NETKITBASE is not set
# BR2_PACKAGE_NETKITTELNET is not set
# BR2_PACKAGE_NETATALK is not set
# BR2_PACKAGE_NETPLUG is not set
# BR2_PACKAGE_NETSNMP is not set
# BR2_PACKAGE_NETSTAT_NAT is not set
# BR2_PACKAGE_NETWORK_MANAGER is not set
# BR2_PACKAGE_NOIP is not set
# BR2_PACKAGE_NFS_UTILS is not set
# BR2_PACKAGE_NGIRCD is not set
# BR2_PACKAGE_NGREP is not set
# BR2_PACKAGE_NTP is not set
# BR2_PACKAGE_NUTTCP is not set
# BR2_PACKAGE_OLSR is not set
# BR2_PACKAGE_OPENNTPD is not set
# BR2_PACKAGE_OPENSSH is not set
# BR2_PACKAGE_OPENSWAN is not set
# BR2_PACKAGE_OPENVPN is not set
# BR2_PACKAGE_PORTMAP is not set
BR2_PACKAGE_PPPD=y
BR2_PACKAGE_PPPD_FILTER=y
BR2_PACKAGE_PPPD_RADIUS=y
BR2_PACKAGE_PPTP_LINUX=y
# BR2_PACKAGE_PROFTPD is not set
# BR2_PACKAGE_QUAGGA is not set
# BR2_PACKAGE_RADVD is not set
BR2_PACKAGE_RP_PPPOE=y
# BR2_PACKAGE_RSH_REDONE is not set
# BR2_PACKAGE_RSYNC is not set
# BR2_PACKAGE_SAMBA is not set
# BR2_PACKAGE_SER2NET is not set
# BR2_PACKAGE_SOCAT is not set
# BR2_PACKAGE_SOCKETCAND is not set
# BR2_PACKAGE_SPAWN_FCGI is not set
# BR2_PACKAGE_SQUID is not set
# BR2_PACKAGE_STUNNEL is not set
# BR2_PACKAGE_TCPDUMP is not set
# BR2_PACKAGE_TCPREPLAY is not set
# BR2_PACKAGE_TFTPD is not set
# BR2_PACKAGE_THTTPD is not set
# BR2_PACKAGE_TINYHTTPD is not set
# BR2_PACKAGE_TN5250 is not set
# BR2_PACKAGE_TRANSMISSION is not set
# BR2_PACKAGE_UDPCAST is not set
# BR2_PACKAGE_USHARE is not set
# BR2_PACKAGE_VPNC is not set
# BR2_PACKAGE_VSFTPD is not set
# BR2_PACKAGE_VTUN is not set
# BR2_PACKAGE_WGET is not set
BR2_PACKAGE_WIRELESS_TOOLS=y
BR2_PACKAGE_WIRELESS_TOOLS_LIB=y
# BR2_PACKAGE_WPA_SUPPLICANT is not set
# BR2_PACKAGE_XL2TP is not set
BR2_PACKAGE_WVDIAL=y

#
# Package managers
#
# BR2_PACKAGE_IPKG is not set

#
# rpm requires libneon with SSL, XML and ZLIB support
#

#
# Real-Time
#
# BR2_PACKAGE_XENOMAI is not set

#
# Shell and utilities
#
# BR2_PACKAGE_AT is not set
# BR2_PACKAGE_BASH is not set
# BR2_PACKAGE_DASH is not set
# BR2_PACKAGE_DIALOG is not set
# BR2_PACKAGE_FILE is not set
# BR2_PACKAGE_INOTIFY_TOOLS is not set
BR2_PACKAGE_LOCKFILE_PROGS=y
# BR2_PACKAGE_LOGROTATE is not set
# BR2_PACKAGE_SCREEN is not set
# BR2_PACKAGE_SUDO is not set
BR2_PACKAGE_WHICH=y
# BR2_PACKAGE_XMLSTARLET is not set

#
# System tools
#
BR2_PACKAGE_ACL=y
BR2_PACKAGE_ATTR=y
# BR2_PACKAGE_BOOTUTILS is not set
# BR2_PACKAGE_HTOP is not set
BR2_PACKAGE_KMOD=y
# BR2_PACKAGE_KMOD_TOOLS is not set
# BR2_PACKAGE_MODULE_INIT_TOOLS is not set
# BR2_PACKAGE_PROCPS is not set
# BR2_PACKAGE_PSMISC is not set
# BR2_PACKAGE_RSYSLOG is not set
# BR2_PACKAGE_SYSKLOGD is not set
# BR2_PACKAGE_SYSVINIT is not set
# BR2_PACKAGE_SYSTEMD is not set
BR2_PACKAGE_UTIL_LINUX=y
# BR2_PACKAGE_UTIL_LINUX_MOUNT is not set
# BR2_PACKAGE_UTIL_LINUX_FSCK is not set
# BR2_PACKAGE_UTIL_LINUX_LIBMOUNT is not set
BR2_PACKAGE_UTIL_LINUX_LIBUUID=y
# BR2_PACKAGE_UTIL_LINUX_UUIDD is not set
BR2_PACKAGE_UTIL_LINUX_LIBBLKID=y
# BR2_PACKAGE_UTIL_LINUX_AGETTY is not set
# BR2_PACKAGE_UTIL_LINUX_CRAMFS is not set
# BR2_PACKAGE_UTIL_LINUX_SWITCH_ROOT is not set
# BR2_PACKAGE_UTIL_LINUX_PIVOT_ROOT is not set
# BR2_PACKAGE_UTIL_LINUX_FALLOCATE is not set
# BR2_PACKAGE_UTIL_LINUX_UNSHARE is not set
# BR2_PACKAGE_UTIL_LINUX_RENAME is not set
# BR2_PACKAGE_UTIL_LINUX_SCHEDUTILS is not set
# BR2_PACKAGE_UTIL_LINUX_WALL is not set
# BR2_PACKAGE_UTIL_LINUX_PARTX is not set
# BR2_PACKAGE_UTIL_LINUX_ARCH is not set
# BR2_PACKAGE_UTIL_LINUX_INIT is not set
# BR2_PACKAGE_UTIL_LINUX_KILL is not set
# BR2_PACKAGE_UTIL_LINUX_LAST is not set
# BR2_PACKAGE_UTIL_LINUX_MESG is not set
# BR2_PACKAGE_UTIL_LINUX_RAW is not set
# BR2_PACKAGE_UTIL_LINUX_RESET is not set
# BR2_PACKAGE_UTIL_LINUX_LOGIN_UTILS is not set
# BR2_PACKAGE_UTIL_LINUX_WRITE is not set

#
# Text editors and viewers
#
# BR2_PACKAGE_ED is not set
BR2_PACKAGE_LESS=y
BR2_PACKAGE_NANO=y
BR2_PACKAGE_NANO_TINY=y
# BR2_PACKAGE_UEMACS is not set
# BR2_PACKAGE_VIM is not set

#
# Host utilities
#
# BR2_PACKAGE_HOST_LPC3250LOADER is not set
# BR2_PACKAGE_HOST_OPENOCD is not set
# BR2_PACKAGE_HOST_SAM_BA is not set
# BR2_PACKAGE_HOST_UBOOT_TOOLS is not set

#
# Filesystem images
#
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
# BR2_TARGET_ROOTFS_EXT2 is not set
# BR2_TARGET_ROOTFS_JFFS2 is not set
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_CPIO=y
# BR2_TARGET_ROOTFS_CPIO_NONE is not set
BR2_TARGET_ROOTFS_CPIO_GZIP=y
# BR2_TARGET_ROOTFS_CPIO_BZIP2 is not set
# BR2_TARGET_ROOTFS_CPIO_LZMA is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
# BR2_TARGET_ROOTFS_ROMFS is not set

#
# Bootloaders
#
# BR2_TARGET_BAREBOX is not set
# BR2_TARGET_UBOOT is not set

#
# Kernel
#
BR2_LINUX_KERNEL=y
# BR2_LINUX_KERNEL_3_3 is not set
# BR2_LINUX_KERNEL_CUSTOM_VERSION is not set
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
# BR2_LINUX_KERNEL_CUSTOM_GIT is not set
BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="file:///home/tovantran/Equinox/buildroot-2012.05/package/linux/equinox_kernel.tar.gz"
BR2_LINUX_KERNEL_VERSION="custom"
BR2_LINUX_KERNEL_PATCH=""
# BR2_LINUX_KERNEL_USE_DEFCONFIG is not set
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/equinoxpayments/l5000/kernel.config"
BR2_LINUX_KERNEL_UIMAGE=y
# BR2_LINUX_KERNEL_ZIMAGE is not set
# BR2_LINUX_KERNEL_VMLINUX is not set
# BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM is not set

#
# Linux Kernel Extensions
#
# BR2_LINUX_KERNEL_EXT_XENOMAI is not set
# BR2_LINUX_KERNEL_EXT_OCF_LINUX is not set
# BR2_LINUX_KERNEL_EXT_RTAI is not set